2011年4月23日 · ip nat inside source static tcp 10.115.2.10 25 interface Dialer0 25 ip nat inside source static tcp 10.115.2.10 443 interface Dialer0 443 ip nat inside source static tcp 10.115.2.10 3389 interface Dialer0 3389 ip nat inside source static tcp 10.115.2.10 80 interface Dialer0 80 ip route 0.0.0.0 0.0.0.0 Dialer0! ip access-list extended IPFW-ACL

2008年1月10日 · How do I open port 3389? This is what I typed in, but it didn't work. static (inside,outside) tcp x.x.x.x 3389 192.168.3.2 3389 netmask 55.255.255.255 access-list outside_in permit tcp host any host x.x.x.x eq 3389†I don't know what to

2019年4月24日 · The eq 3389 in your case refers to TCP/3389 which is the service port on the RDP server. The client will alwas connect from a random ephemeral port which is why it is not a good idea to specify the clients port, unless you are going to use a very wide range. cheers, Seb.

2008年3月20日 · I monitor network traffic with Fluke Report analyzer and notice that when they do this they are using up a lot of bandwidth. My bandwidth will spike close to 90-100 utilization and a 90% of that is from the RTD user and protocal TCP 3389.

2013年9月19日 · Good Afternoon I am not an expert in Cisco so i would like some help from you guys (the experts). I need to block port 3389 in a 3560x L3 switch my idea for this was to make an access-list: ip access-list extended BLOCK_RDP deny tcp any eq 3389 105.103.28.0 0.0.0.255 When i apply this on the in...

2009年4月9日 · access-list 101 permit tcp 137.55.67.0 0.0.0.255 137.55.68.0 0.0.3.255 eq 3389 Note : The subnet of the interface F6/0 is a pool of non compliant PCs that we would like to restrict access in/out. Question 1: With 100 ACL applied as the "out" at F6/0 to subnet 137.55.67.0 I can RDC from subnet with 137.55.68.0 and NOT the other way ( from 137.55 ...

2016年8月23日 · ip nat inside source static tcp 192.168.1.10 3389 interface GigabitEthernet0/0 3389. ACL: ip access-list extended 101 permit tcp 200.0.0.0 0.0.0.255 192.168.1.10 eq 3389 ip access-list extended 101 deny tcp any 192.168.1.10 eq 3389 ip access-list extended 101 permit ip any any. Interface: interface g0/0 ip access-group 101 in

2022年9月14日 · Hello! I'm using Arctic Wolf for security scanning, and they're telling me that port like 135 and 3389 are open. I have an externally accessible server with 1 to 1 NAT setup, then my ACLs only permit web traffic. When I do a packet capture, and try to initiate an RDP connection to the external IP ad...

2015年12月16日 · Hi Folks, Should I allow both the TCP and UDP port 3389 in the Cisco ASA 5545 firewall in order to allow RDP for accessing our terminal server from external networks. Regards, Ajay Sundar.N

2015年5月11日 · In ASDM the easiest place to do this is Configuration > Firewall > Public Servers. You need the server address (private IP) a public address (here you could potentially use the ASA's outside interface) and an access entry allowing RDP (tcp/3389) in via the outside interface. In the cli, it would look something like this: