Ejector has to be cut off at the bottom of the notch (picture included in zip file on the sea), but otherwise takes a complete Tec-9 parts kit (any variant with threaded rear cap on upper), 1/4-20x1.5" or 1/4-28x1.5" bolt and nut, and AR grip of your choice.

2013年4月2日 · The Intratec TEC-DC9 (TEC-9) is a blowback-operated semi-automatic handgun, chambered in 9×19mm Parabellum. Designed by Intratec, an American offshoot of Interdynamic AB, all the three models are referred to as the TEC-9, although only one model was sold under that name. The TEC-9 is made of inexpensive molded polymers and stamped steel parts.

That didn't work out, so it hit the domestic market as the TEC-9, now modified to shoot from a closed-bolt design. The TEC-9 became illegal as a result of the 1994 AWB, which resulted in the design being modified to the AB-9 (AB standing for "After Ban"). Interdynamic eventually closed its doors and Kel-Tec never attempted to revive the IP.

2020年6月14日 · Well the big problem with the Tec 9 was jamming problems. 30 years ago I bought 4 of them on sale. They all jammed after 3-4 shots. Sold two of them and worked on the last two. One I did get to feed well and could actually bump fire all 32 rounds. Eventually sold it a number of years ago.

2020年6月14日 · The stock ( it was a wire stock, similar to the stock on an M3 Grease gun) was on the select fire MP-9 version; there were only a few of those made; I don't remember ever seeing the wire stock for sale as a seperate part from Intratec;

2022年11月3日 · A Tec-9 is 9mm is 9mm. The Tec-22 firing pin isn't even in the same class and would never fit in a Tec-9. The Tec-9 and AB-10 use the same firing pin. Whoever is telling you these things about different calibers is wrong. The Tec-9's are junk, plain and simple.

27 votes, 20 comments. Hi all, just wanted to spark some conversations about the TEC-9 and what your thoughts/testing on it has been like since it's…

2020年3月18日 · Later versions of the TEC-9 and AB-10 had a threaded upper receiver tube at the rear and a screw-on end cap to contain the bolt, recoil spring, and buffer plate even if removed from the lower receiver, solving the problem of lower receiver failure when using hot ammo.

The STRYK 18 shoots at 910 rpm, has the potential to do 33 damage with MM skills, and can have a 32 round magazine. So I believe that making the Tec-9 a pistol wouldn't break the balance. I think it would be really cool if it starts as a semi …

2021年5月13日 · A Tec-9 ser # 40xxx and another #120xxx and a TEC DC-9 ser. # D068,1xx. I didn't bother pulling out the other two as they are burried deep. I looked up my old form 4 for the registered Tec-9 and it's ser. # was 12,7xx and had button sights. Curious to see if anyone on here has a true button sight TEC to compare serial number ranges with.