table d101—continued degree day and design temperatures a for cities in the united states

table d101. degree day and design temperatures a for cities in the united states

Table D 104.1 lists the discharge capacity flow for sizing each drain inlet. The flow rates shall be of rectangular roof scuppers of various widths with various permitted to be added to determine the flows in each of the heads of water. The maximum allowable level of water on drainage systems.

Table D101.1 of said California Plumbing Code is hereby amended to read as follows: D101.1 Maximum Rates Of Rainfall For Various Cities. The rainfall rates in table D101.1 shall be used for design unless higher values are established locally.

Chapter 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems

Design data developed from office locations within an urban area, not from airport temperature observations.

All data were extracted from the 1985 ASHRAE Handbook, Fundamentals Volume. Design data developed from airport temperature observations unless noted. Latitude is given to the nearest 10 minutes. For example, the latitude for Miami, Florida, is given as 25o50 ′,

Section D101.1 and Table D101.1 (for California) as set forth in Appendix D of the California Plumbing Code are amended to read as follows: D 101.1 Maximum rates of rainfall for various cities. The rainfall rates in Table D101.1 shall be used for design unless higher values are established locally.

D101.1 Applicability This appendix provides general guidelines for the sizing of storm water drainage systems based on maximum rates of rainfall for various cities. The rainfall rates in Table D101.1 shall be permitted to be used for design unless higher values are established locally.

1. Appendix D – 2016 California Plumbing Code Table D101.1 (60 min, 100 yr) Minneapolis MN – Always Check Code Amendments