Faux Tung Oil versus Real - FineWoodworking
2010年6月13日 · An oil/varnish is more durable and protective than a pure tung oil. Tung oil has little water or water vapor resistance and no abrasion resistance. True oils must be continually re-applied to maintain and of the appearence of the wood surfaces. The varnish component in an oil/varnish adds long term protection an appearence maintenance. The description of Circa …
danish oil vs. tung oil - FineWoodworking
2006年4月28日 · Zar Wipe-on Tung Oil Val-Oil Hope's Tung Oil Varnish Gillespie Tung Oil Waterlox Original Sealer/Finish General Finishes' Arm R Seal Jasco Tung Oil One way to tell whether the product is an oil/varnish or a wiping varnish is to read the application instuctions. Oil/varnishes are applied, then given some time to set, then wiped dry.
Exterior Doors: spar varnish or teak oil - FineWoodworking
2005年6月28日 · The two finishes that have been recommended are spar varnish and teak oil. I plan on using a conditioner first, a clear stain and then use the spar or teak oil.
Maple: tung oil vs. BLO?? - FineWoodworking
2006年1月26日 · Much is made of using boiled linseed oil on Maple. In an earlier thread, someone asked if tung oil would work as well, but I don’t think anyone answered. I’m about to finish a maple piece. So, any opinions on BLO vs. tung oil??
Waterlox Vs Watco Tung Oil Finish - FineWoodworking
2024年8月6日 · waterlox is a varnish if i'm not mistaken, and not hard as those go? I've never used it. I see a reference to an old technical data sheet that says watco tung oil finish is a long oil alkyd plus tung oil. It's hard to know what that means for me (not a chemist) for a dried film - is the tung also cooked with alkyd and linseed or something else as an oil, or is it a varnish and the …
Minwax - Minwax Antique Oil Finish - FineWoodworking
2014年12月4日 · The author tested 15 wipe-on finishes, including a water-based finish and both tung-oil and linseed-oil-based finishes. Pure boiled linseed oil and Minwax Fast-Drying Polyurethane, a brushing finish, were added for comparison.
Oil/Varnish Recomendations - FineWoodworking
2007年5月25日 · The Watco Danish and the Watco Teak Oil are practically the same, with a bit of tung added to make the Teak Oil. These are quite similar to the Minwax Antique Oil. They are all quite similar to what you would get by mixing oil, varnish, and thinner. Pure Tung Oil doesn't offer the same protection as the oil/varnish mixes.
Teak oil refinish gone wrong - FineWoodworking
2024年7月5日 · Typically, they would be cooked together in a varnish, but rosin ester makes a far better varnish with tung oil, but it's probably harder to make (tung is reactive at high temperatures) and tung oil costs more.
Danish Oil VS Tung Oil - FineWoodworking
2005年12月6日 · Watco Danish Oil is an oil/varnish mix. Minwax Antique Oil Finish, and Minwax Tung Oil Finish are also both oil/varnish mixes (I don't know how they differ.) Deft Danish Oil Finish also fits that category. These finishes are a little harder than a pure oil and offer more protection, butare still capped at a satin sheen.
Correct Me If I’m Wrong: - FineWoodworking
2022年5月14日 · It's all the same thing, Danish oil, X-oil finish. Most of these products use BLO and very little (if any) of the Tung or Teak or what ever oil they proclaim to be.