Toxic Characteristic Waste Codes Table V: Toxicity Characteristic Waste Codes (D004 - D043) Any waste which is or which contains any (even tiny trace quantities) of these elements or compounds must identify them in the "chemical description."

RCRA characteristic hazardous waste is a solid waste that exhibits at least one of four characteristics defined in 40 CFR Part 261 subpart C — ignitability (D001), corrosivity (D002), reactivity (D003), and toxicity (D004 - D043).

2024年12月5日 · This page is the waste designation decision matrix provided by the Small Business and Local Government Assistance program to aid businesses in deciding how certain wastes must be handled. Review the D004–D043 code list below. Make a note of the appropriate code for the waste you have for use later in the decision matrix.

The TCLP, or Toxicity Characteristic Leaching (not Leachate) Procedure is designed to determine the mobility of both organic and inorganic analytes present in liquid, solid, and multiphasic wastes.

Waste that have not been specifically listed may still be considered a hazardous waste if exhibits one of the four characteristics defined in 40 CFR Part 261 Subpart C - ignitability (D001), corrosivity (D002), reactivity (D003), and toxicity (D004 - D043).

EPA’s review of the treatment data on TC metal and mineral processing wastes shows that UTS are achievable for the UHCs in TC metal wastes (including mineral processing wastes).

F004 The following spent nonhalogenated solvents: cresols, cresylic acid, and nitrobenzene; and the still bottoms from the recovery of these solvents; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above nonhalogenated solvents or those solvents listed in F001, F002, and...

(a) A solid waste (except manufactured gas plant waste) exhibits the characteristic of toxicity if, using the Toxicity Characteristic Leaching Procedure, test Method 1311 in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, as incorporated by reference in § 260.11 of this chapter, the extract from a re...

2024年12月2日 · EPA’s review of the treatment data on toxicity characteristic (TC) metal and mineral processing wastes shows that universal treatment standards (UTS) are achievable for the UHCs in TC metal wastes (including mineral processing wastes).

Toxicity – waste codes D004 to D043 A listed hazardous waste must meet the defined use or status as listed at 40 CFR 261, Subpart D. Analysis usually plays a minor role in determining if a waste is listed; safety data sheets (SDS) and generator knowledge are much more important in making this determination.