2006年5月5日 · In the July 2005 issue of More Woodturning Mr. Holder explained how to sharpen a 5/8" rod bowl gouge on the Tormek. The information came from Torgny Jansson who works for Tormek. It requires the protrusion of the tool be three inches from the SVD-!85 jig. A wooden spacer 2.05" is used to set...

2006年10月31日 · Does anyone use the Tormek Style CBN wheels from Woodturners Wonders on their Tormek grinder? Is so, what grit do you use for your turning tools and how do you like them. I'm looking for a grit that gives similar results as a …

2010年7月5日 · Hello, I have the Tormek grinding system for gouges and all ither woodturning tools but I have the impression that I cannot make a good fingernail form with that system. I wonder whether that is up to me or whether it is the system which does not allow to do it. I …

2022年1月28日 · Newbie question! What’s the best way to “put the edge back on” a thin (1/16” x 1-1/4”) parting tool? I have a Tormec system with jigs, or is it better just to burnish the edges with a carborundum stone? So far I have not ground the point down as …

2004年4月26日 · I have read several articles that indicate slow wet sharpening is better than high speed on a bench grinder. I don't have any first hand knowledge, but my question is: if you use a Tormek, the majority of the sharpening is done with the …

2021年2月2日 · A couple of other options: 1) Tru- Grind by Woodcut 2) Penn State Ind (PSI) All 3 systems work similarly, but cant tell you about any detail differences, other than Lyle Jaimeson prefers the Trugrind jig over the varigrind because of the metal “flap” that contacts the just sharpened edge when the tool is pulled out.

2005年1月12日 · Any idea about honing gouges and or skews right off a 80 grit wheel on the Tormek leather wheel. Since I have the Tormek unit it would be convenient to use it instead of a hand held diamond unit. :confused:

2009年6月13日 · Last year I bought a Woodcraft lo speed , 2 wheel sharpener. After sharpening with it for a few days I realized that the direction of rotation was going down into the gouge and not going up to the blade. I checked back at Woodcraft and found the direction of rotation for the Delta 8" was the...

2005年12月10日 · One covers that exact subject and another covers how to use the Tormec with the Wolverine. In addition, to make it even easier, Don Geiger has a gismo that fits in the Oneway system that allows you to adjust the vertical (height) of the jig by adding an adjustment on the rod to allow for up and down.

2019年3月29日 · Therefore, any given setting of a Varigrind jig can be matched by an appropriate setting of the Tormec parameters (within their respective ranges of adjustment). In one of the above posts, John Lucas reported success in reasonably matching the 40/40 grind on a spindle gouge, and posted a picture of the jig setting that he used.