2015年10月4日 · That indicates that the paper type for tray 2 might have been inadvertently changed to something other than "Plain" or "Any". Some machines require you to manually set paper size, others autodetect it, if this one is a model where you manually set it then it might have been set to something other than "Letter".

10. First, reinstall Tray #1 (the top tray). Make sure it slides all the way into your machine. 11. Then, reinstall Tray #2 (the bottom tray). Make sure it slides all the way into your machine. The left and the right side of the paper tray should be flush with the left and right side of your printer. a.

2025年1月23日 · Usually the second tray for this printer model is used to print Envelopes. (2). Check next Laserjet M227 user guide in page 18 for the paper trays available for this printer model.

2024年12月5日 · Pull out the tray and look for a blue button or lever inside the front of the tray. Press it and push the tray back to letter position. If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution.

2016年10月18日 · Tray 1 is closed. In order to print I have to push the ok to switch to tray 2 then it will print. It comes up this way each time. I have tried to manually change it as well as going into the printer properties. In the properities I have Tray 1 disabled but it doesn't stop it from defaulting back to tray 1. Any help would be appreciated.

2017年5月24日 · 2) Remove 2nd tray assembly completely. 2) Power up the printer without 2nd tray assembly . 3) Power down the printer . 4) Install 2nd tray assembly . 5) Power up the printer . Check if the paper tray is getting detected, if the issue persists, follow below steps. 1. Touch Copy. 2. Touch Settings. 3. Change Paper Type to Plain Paper. 4.

2022年4月21日 · Since changing to a Windows 11 machine I am unable to use Tray 2 on my printer as the HP Smart app doesn’t show a Tray 2 option. It doesn’t show using Windows print services correctly either. I have logged a case but support haven’t responded, can anyone help?

2025年3月13日 · Test Tray 2 Through the Printer Menu. From the printer's control panel, print a test page specifically from Tray 2: Navigate to Setup > Reports > Printer Status Report or similar. During this process, choose Tray 2 as the source to check if it feeds paper properly. 4. Reload and Align Paper in Tray 2. Remove the paper from Tray 2, fan the stack ...

"Tray 1 Settings" or "Tray 2 Settings" This message is displayed when the setting to confirm the paper type and size is enabled. To change the check paper setting follow complete these steps.

2018年11月19日 · 2.) If a Show Details button displays at the bottom of the dialog, click it to reveal all available menu options. The button changes to Hide Details when clicked. 3.) Click the Un-named menu and select Paper/Quality. 4.) Click Source and select Tray 2. Enabling Quite mode on the printer may disable the beeps.