2012年5月12日 · The glow plug light would come on and stay on until the I turned the key to the start position. With the engine light on, the glow plug light would not come on at all after it set the code. There were other codes for the glow plug circuits, but I only concentrated on the main code (U0106 -lost communication with glow plug control module).

2018年9月22日 · I received a DTC code of U0106, "lost communication with glow plug module" I replaced the glow plug controller back in April with an OEM p/n973796350 due to a DTC P0607. Everything appeared to go well till yesterday. The truck seems to run correctly, however I just don't know where to start.

2014年1月15日 · I have a code U0106 - Lost communication with glow plug module 1. So my experience in electrical engineering and salt spray automotive testing has taught me salt is highly conductive.

2013年9月1日 · Unable to communicate or lost communication with glow plug controller. I searched this code via DF and Google and did not find any one place that had a lot of info, just a tidbit here and there. I found that the glow plug controller has been known to go bad, (and that was the majority of fixes...

2018年3月22日 · Hey guys, so I have ran into the U0074 & U0106 codes when the temps dropped near zero and the P2536 when I reinstalled my FASS system from being rebuilt. I saw threads about these first two codes but I think I have a different issue. My truck is deleted and all connections from DPF are...

2023年8月10日 · Hi, I have a 2005 gmc Sierra 2500 with a u0106 code. I bought the truck with no CELs a couple weeks ago. This all started when the PNRD321 gauge didn’t illuminate so I resoldered the 511 resistors on the cluster and fixed that. After that a p0700 and p0381 code came up, I cleared and just...

2017年4月22日 · Tried remote starting my truck today, and it failed. Got in the truck and started it with the key and the U0106 code is now being thrown. It looks like it is a communications issue with the glow plug module. Does anyone have any experience with this code?

2015年2月10日 · Just randomly checked my dtc's this morning and got a code that reads lost communication with glow plug control module. The truck still seems to start fine and I live in wisconsin and I have not plugged my vehicle in at all yet this year is …

2024年2月22日 · I got this code U0106 after replacing the factory GPCM with a Dorman (I got a consistent P0670.) I swapped in a Dormam After some experimenting I determined that the Dorman is more susceptible to low battery voltage than the factory module (which is a Beru made in Germany.) The glow plug lamp on the dash would come on and never go off.

2008年3月15日 · Lost Communication with Glow Plug Control Module Anyone know how or why you'd get this? I traced the wires from the Module back to the fuse box, the plugs, and to the big harness on the driver side, but I can't find anything that looks weird. I even opened the connector and the pins all look...