2020年4月22日 · The U1108 code for Mitsubishi vehicles indicates a Combination Meter Time-Out Error. The combination meter, also known as the instrument cluster, is responsible for displaying various important information to the driver, such as speed, fuel level, engine temperature, and warning lights.

The U1108 code indicates a Combination Meter Time-Out Error, which typically means that there is a communication issue between the combination meter (also known as the instrument cluster) and the vehicle's main computer system.

If DTC No. U1108 is stored in the ETACS-ECU, diagnose the CAN main bus line. Whenever the ECU is replaced, ensure that the power supply circuit, the ground circuit and the communication circuit are normal. If signal from the combination meter cannot be received for 500 milliseconds or more, the ETACS-ECU stores DTC No. U1108.

2020年4月22日 · Repair Information for U1108 Mitsubishi code. Learn what Combination Meter Time-Out Error means, location and how to repair?

When the CAN data cannot be received from the combination meter, the diagnosis code No. U1108 will be set. PROBABLE CAUSES Damaged wiring harness or connector(s)

If the DTC U1108 is set to the ETACS-ECU, always diagnose the CAN bus line. TROUBLE JUDGEMENT If the ETACS-ECU receives the signal from the CAN-B line ECU which does not exist in the written variant code information, the ETACS-ECU sets DTC U1108.

The automobile fault code U1108 indicates a problem with the Combination Meter, which can cause the Engine Light to turn on. This fault code can be caused by a faulty Combination Meter, an open or shorted Combination Meter harness, or a poor electrical connection in the Combination Meter circuit.

2019年3月25日 · U1108没有找到，估计也是通信故障一类的警告，你diagbox诊断应该能够得出故障含义的。 另外，这类通信故障不一定会影响到安全驾驶，我是1.8车型，长期有U1309这个故障（可能和我更换过变速箱ecu有关吧，不过故障发生时的参数记忆表面是在通电自检阶段，而不 ...

2020年4月22日 · Repair Information for U1108 code. Learn what Combination Meter Time-Out Error means, location and how to repair?

Engine not cranking or 3 seconds have passed since the engine was cranked and battery voltage is 10 volts or greater, the combination meter was unable to receive a signal through the CAN bus line.