2017年8月2日 · Run it on both ;) I run instance on UDP 1194, and then one on TCP 443 for those places that have to bounce off a proxy or that might have UDP 1194 blocked. If the place has internet then almost always 443 will be open. But for performance you will normally want to be on UDP, but that can not work off a proxy, etc. So just run 2 instances.

2016年11月16日 · The setup has run smoothly everything worked as demonstrated, however port 1194 using the udp protocol refuses to open, this port is NOT blocked by my ISP as i have used it before, i opened a different port using the TCP protocol which is working so im at a loss as to why 1194 won't open, any advice would be appreciated. Kind Regards. Ryan

2018年5月20日 · On the other hand, if the network you're in is heavily protected, chances are, that 1194/udp is blocked as well as 443/udp as the latter is unknown as running udp and some administrators will find that extremely suspicious, while 1194/udp is known to be OpenVPN. So 443/udp could trigger alarms in firewalls/IDS/etc. that 1194/udp wouldn't and ...

Sun May 8 19:54:36 2016 us=863664 WARNING: file 'firebox-udp-1194-vpnuser-tls.key' is group or others accessible Sun May 8 19:54:36 2016 us=863673 Control Channel Authentication: using 'firebox-udp-1194-vpnuser-tls.key' as a OpenVPN static key file

2017年12月27日 · I have a firewall configured OpenVPN, the configuration as far as I can see goes well, however I do not listen to port 1194 in UDP, by the console of the pfsense make the following commands I see that the service is active: [2.4.2-RELEASE][[email protected]]/root: top

2014年5月30日 · Well, had to keep it UDP 1194. When I tried it after a while it did the same thing as port tcp 21.. I have a feeling These setup don't work in my network infrastructure, gotta check what's going on.. I'm using a Watchguard Firebox X700 with a 2gb cf card..

2021年8月8日 · I'm hoping someone can help me with a firewall configuration issue. I use OpenVPN on my pfSense box. Using UDP 1194, no problem, everything connects. However, I also want to use TCP 443 as many WiFi hotspots only allow ports 80 and 443. To connect to my OpenVPN server, I would need to connect via TCP 443.

2024年4月26日 · You told us here that your phone device, using a openvpn client, want to connect to your WAN IPv6 using port 1194, UDP ... 1194 is not 546 neither 547, so the firewall log lines you've listed are not related. Show us your WAN firewall rules, the place where an OpenVPN firewall rule should be listed, with destination port 1194, protocol UDP.

2013年12月23日 · pfsense-udp-1194-vpn1.ovpn should be the client conf file. Post the sanitised text in that. The server conf file looks fine. As long as the client has the right matching stuff, and your ISP does not block port 1194, it should work!

2018年6月14日 · Mike I followed your instructions and set up the firewall. I rebooted the computer and checked the firewall settings again and shows open. When I use the scanany app from my smart phone (on the same network) I only see UDP ports 137, 1900, 5353, & 5355 open. I’m attaching the export from the firewall page .