European Parallel flange UPE channels beam sizes and dimensions for the Steel library.

The steel beam dimensions for the UPE 140 section can be seen in the table. The depth of the section is 140 mm. The width of the section is 65 mm. The UPE 140 section has an area of 1840mm 2. The below table outlines the UPE 140 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.

Dimensions are in millimeters unless otherwise indicated.

Current table represents European standard U (UPE) channels with parallel flanges, UPE steel profile (UPE beams), specifications, properties, dimensions. Manufactured according to standards :

European Standard for UPE, PFC and UPN Channels. The standard 10365 was prepared by Technical Committee ECISS/TC 103 “Structural steels other than reinforcements”, the secretariat of which is held by DIN. Note: Tolerances on dimensions, shape and mass are given in EN 10279. Channel Parallel Flange UPE and PFC. Channel Taper Flange UPN, U and CH.

Current table represents European standard U (UPE) channels with parallel flanges, UPE steel profile (UPE beams), specifications, properties, dimensions. Manufactured according to standards : DIN 1026-2: 2002-10 EN 10279: 2000 (Tolerances) EN 10163-3: 2004, class C, subclass 1 (Surface condition) STN 42 5550 ČTN 42 5550 TDP: STN 42 01

UPE profile is a U-shaped profile made by hot rolling. Exmet OÜ offers UPE beams from stock as follows: UPE80–UPE400. Mark: S235, S355. Standard length: 12,000 mm. If you do not find a suitable selection in stock, please contact us to order cut-to-size products.

This document provides specifications for U-shaped steel channels known as UPE channels, including their nominal dimensions, cross-sectional properties, and mechanical properties. A table is included listing various sizes of UPE channels along with their heights, widths, wall thicknesses, radii, and other geometric properties.

U, UPE and UPN steel beams are U-profile steel beams with inclined or parallel flanges that are used as cross beams or purlins. Image: Steel profiles U, UPE, UPN - baukobox. Steel beams are divided into the following standard profiles: These profiles are rarely used for bolted connections due to their inclined inner surfaces of the flanges.

UPA stands for a distinct category of channel sections characterized by their parallel flanges, manufactured in compliance with EN 10365 and adhering to the tolerances outlined in EN 10279: 2000. Unlike the UPE series, UPA channels feature flanges and webs of identical material thickness, falling under the Upe-Upn-Pfc classification.