
The UnderCover Flex is a hard-folding truck bed cover that gives you the ultimate control of your truck bed, offering three secure riding positions. The cover is easy to remove, and is mounted flush with your trucks bed rails. Each Flex has a bed rail mounting system equipped with rubber seals and FLEX drain tubes that carry water away
Step 3 - Pull tonneau cover rearward, releasing hinge from mounting bracket, and lift the cover o˜. Step 1 - Place tonneau cover on the truck. Slide the slots in the 4 bar hinges (attached to the cover) over the posts on the front mounting brackets. Step 2 - Push the cover forward to lock the
3 Install Cover Slide the two front mounting bolts into the track on the underside of the Flex tonneau cover. Place the Flex tonneau onto the mounting rails with the small-est panel towards the cab of the truck and with the front ˜ap covering the bulkhead (front rail of the bed). 4 Unfold Cover and Adjust Carefully unfold the cover,
The ˜t of the cover to the truck bed is determined by the front mounting brackets. This measure-ment is a good starting point. Unfortunately not all truck beds are assembled 100% square, so some adjustments may be necessary after the cover is set on the truck. RE: Step 2 …
If installing on truck with Deck Rail System follow instructions below. If installing on truck without Deck Rail System skip to measurement charts on reverse side. Remove the end caps from the Deck Rail System.
tonneau cover, one on each side. Place the Flex tonneau onto the mounting rails with the smallest panel towards the cab of the truck and with the front ˚ap covering the bulk-head (front rail of the bed). 3 Install Cover Once in the fully open position place a front retainer clamp, ˚at washer, lock washer and the star knob on the front mounting
The ˜t of the cover to the truck bed is determined by the front mounting brackets. This measure-ment is a good starting point. Unfortunately not all truck beds are assembled 100% square, so some adjustments may be necessary after the cover is set on the truck. RE: Step 2 …
UnderCover, Inc. warrants the structure of your Ridgelander tonneau cover to be structurally free from defects in material and workmanship for (3) years from the retail date of your purchase. The
l Tonneau cover MUST be free of foreign material including snow and ice before opening panels. l Do NOT tow your vehicle from the rear with the tonneau on your truck. l Do NOT operate vehicle with objects on top of cover. FAILURE TO FOLLOW THESE CAUTIONS MAY RESULT IN SEVERE DAMAGE AND WILL VOID YOUR WARRANTY! FIG 1 - CLOSED POSITION
Folding Tonneau Covers. The Next Generation of Model Speci˜c Install Guide Form # FL71-S ... UnderCover, Inc. P.O. Box 620 Rogersville, MO 65742 (417) 753-8000 (866) 900-8800 ... Truck Bed Rail Utility Rail Cover Mounting Rail Clamp Assembly Rail Spacer 1 A 3. Title: