In UniFi Network, navigate to Settings > Networks and create a new virtual network. Name the network. Optionally configure settings such as VLAN ID, subnet range, DHCP, isolation, content filtering, and DNS. Click Apply Changes. By default, VLANs created on UniFi Gateways do not automatically assign devices to VLANs.

2021年12月21日 · With the new controller, the VLAN only network feature is under Settings -> Advanced Features -> Network Isolation. They renamed it to Network Isolation instead of "VLAN only network". You don't need a USG or any gateway for that feature.

2023年12月26日 · 默认情况下，UniFi 网关允许不同 VLAN 之间的通信。 请参阅 流量规则 了解如何实施限制。 加入特定 WiFi 的客户端设备将被分配到该 WiFi 使用的 VLAN。 要配置此 VLAN，请执行以下操作： 跳转至 Settings 设置> WiFi， 创建一个新的 WiFi。 创建或修改 WiFi 时， 点击网络下拉菜单。 选择所需的网络。 确保 AP 和网关之间的所有端口 配置 为 允许指定网络的 VLAN ID。 否则将导致客户端无法加入 WiFi。 UniFi 交换机默认启用所有流量，但大多数第三方交 …

2021年1月20日 · I’ve created a VLAN only network with VLAN tag 20 in my Unifi controller, and then setup a port profile with the mentioned network as the native network. I have also gone and setup a vlan 20 network in my OPNSense router.

2022年6月9日 · So in this article, I will explain how to set up and secure VLANs in the UniFi Network Console. This article is updated in Jun 2024, using the latest UniFi Network version (8.2.x). Added a firewall rule to block Teleport or VPN traffic from the rest of the network.

Virtual Networks (VLANs) allow you to segment a physical network into separate logical networks, or broadcast domains, without needing additional hardware. This segmentation not only enhances network performance but also strengthens security and optimizes traffic management. Why Use VLANs? VLANs are beneficial in various scenarios:

2021年10月17日 · 在Unifi AC Controller找遍了设置和查看了很多文档（主要是DHCP及Option相关），都没有可以单独设定某些设备的网关，只有最简单的静态IP的设置。 于是只能从USG的系统入手，看如何设置它。 为需要单独设置网关的设备，设置使用静态IP。 （这一步可以在Controller中设置，也可以通过命令行设置） 这样当设备获取IP时，其网关默认为我们OpenWRT了。 仍然存在几个问题： 定义不同用途的VLAN段，将不同用途的网络分配到不同VLAN下。 于是我定义了 …

2024年4月29日 · For ports connecting to end devices (not switches), set the port to use the specific VLAN Only. To extend VLANs over Wi-Fi, create separate SSIDs for each VLAN: Navigate to Wi-Fi and create a new wireless network for each VLAN.

2019年10月5日 · When deploying a new UniFi network using Ubiquiti UniFi hardware and the controller, you may wish to change the management VLAN, and/or the VLAN that the hardware uses to communicate with the UniFi Controller. In this post, I’m going to go over how to do this, as well as troubleshoot if something should go wrong.

In the above video, we took a look at how to use a UniFi Switch to pass external VLANs, such as from an ISP through from fibre to our ethernet based EdgeRouter X. In this example, our ISP will be handing off our connection as fibre, with an SFP.