2023年5月31日 · I've tried everything can think of, I've searched the Ubiquiti forums and made adjustments to my unifi controller settings. Things I've done: Turned off fast roaming Turned …

2020年4月16日 · Aside from the very valid points the other two commenters so far have made, Unifi has two limits of SSIDs-per-radio: 4 if Wireless Uplink / Connectivity Monitor is enabled 8 …

Disclaimer: I use UniFi in a home network setting. Just a single FlexHD for my WiFi needs. For a long time I've always opted to set my 2.4Ghz and 5Ghz manually, usually based off of the …

2022年10月3日 · Unifi Controller version: 7.2.94 Global AP Settings: 2.4GHz Channel Width: 20MHz 5GHz Channel Width: 40MHz Power Transmit: Auto SSID Settings: Wifi Bands: 2.4 & …

After some research, I found a helpful guide on Evan McCann's blog about advanced Wi-Fi settings for Unifi devices. Following the advice from this blog, I was able to resolve the issues …

2024年2月9日 · Resetting wifi on the device did not resolve the issue. Rebooting all unifi devices did no resolve the issue. At the weekend I got to the stage where the S22 would not connect (it …

greed. I’ve had the regular G4 and the Pro, both work excellent over WiFi. I only recently upgraded to a wired connection for the Pro and while nice to have it was by no means …

2022年12月8日 · I have set up a UT-ATA with an analog phone successfully. Phone rings as it should, UT-ATA displays CID, etc. I did have difficult getting this device recognized via WiFi, …

So on the UniFi controller, you would setup a new SSID with the guest options enabled, put the guest SSID on a separate VLAN that can’t connect to the main network, and enable the …

2022年7月21日 · If it's only one device, check what wifi standards it supports and what your APs provide, then check for interference. If it's a Windows device, check it's not doing aggressive …