2018年3月21日 · When found in VW 2.0L PD TDI with engine codes BRM and BEW see Measuring Block 043.2 for Turbocharger Vane Position Sensor (G500) readings. Key On, Engine Off (KOEO) Measuring Value Blocks (MVB) 043.2 should be 0%.

2015年6月25日 · Hi everybody! My 2006 BEW 1.9l TDI can not pass clean test due to "check engine" light. The worst scenario is to spend over C$500 to have "conditional clean test pass". The code I checked with code reader is P2564 (turbocharger boost position control sensor A circuit low). Engine is running like before, very good.

2004年3月31日 · SAE: P2564 Text: Turbocharger Boost Control Position Sensor Circuit Low So I cleared it. Went driving again last night on the highway. About an hour into it, light came on again. Same thing in that there was nothing perceptibly wrong with the car. I floored it a few times, felt great. I feathered it to be as steady as possible, still felt great.

2022年6月10日 · P2564 - 000 - Signal too Low - Intermittent Freeze Frame: RPM: 1827 /min Torque: 216.0 Nm Speed: 26.0 km/h Load: 89.0 % Lambda: -6.4 % Absolute Pres.: 2029.8 mbar Absolute Pres.: 1366.8 mbar Readiness: 1 1 0 0 1 From Ross-Tech wiki "When found in VW 2.0L PD TDI with engine codes BRM and BEW see measuring block 043.2 for G500 readings"

2024年4月25日 · When found in VW 2.0L PD TDI with engine codes BRM and BEW see Measuring Block 043.2 for Turbocharger Vane Position Sensor (G500) readings. Key On, Engine Off (KOEO) Measuring Value Blocks (MVB) 043.2 should be 0%.

2017年6月15日 · When found in VW 2.0L PD TDI with engine codes BRM and BEW see Measuring Block 043.2 for Turbocharger Vane Position Sensor (G500) readings. Key On, Engine Off (KOEO) Measuring Value Blocks (MVB) 043.2 should be 0%.

2018年1月8日 · I'm looking to buy a 2005 mk4 Jetta TDI 5 spd. It has the p2564 code. It looks a bit wet around the lower part of the engine and trans. The splash shield is a little wet at the seams. There seems to be a missing plug on top of the trans with a double hole I can see the flywheel. The coolant sensor plug is dry. Engine oil seems clean.

2007年11月20日 · Hi, Guys. Been a while since I posted. Having problems with our 2004 Jetta. Check engine light came on, brought car to the dealer to find out why, and they tell me it is engine code P2564 & the turbo needs to be replaced to the sum of $2000! I bit my tongue and as politely as I could, I said 'no, thank you'.

2013年11月14日 · I'm working on a '04 Jetta PD with the dreaded p2564 code 385k km already cleaned the turbo with oven cleaner and have the vanes and vacuum pot moving with external vacuum pump moves the rod and will hold vacuum egr parts all cleaned checking the wiring no 5v or ground the wires and connector look clean where is the ECU located ?

2013年8月15日 · I have a 2004 VW Golf TDi with the BEW engine. Yippie for me! Stupid Turbo! Any help, thoughts or suggestions would be greatly appreciated! I do not have the VCDS software/cable, just a more advanced, VW specific code reader. Thanks in …