Follow these simple installation steps for your Virgin Media home phone set up. 1. Plug into the Hub. Push the white cable with the black label into the Hub. Next, connect the power cable. 2. Plug into the wall socket. Push the red label end of the white cable, into the wall socket. Pop the power cable into a nearby plug socket, and turn it on.

One would first disconnect the exchange line at the master socket - take care as it may still have 48 volts DC enabled. Then connect the centre pair of the RJ11 from the Hub to contacts 2 and 5 of any telephone socket. ( or one could use a long modem cable ) …

I recently moved from a home used a dedicated virgin landline. In my new property it is connected to the router with a virgin provided adapter and I have the same issue (it doesn't ring). The phone is does not use an external power supply and if needs an adapter with a ring capacitor and 3 wire connection why didn't virgin supply an adapter ...

The issue is that I want the old phone in another room and I don't want to extend the phone cable to this room from the router. Can homeplugs be used to extend the phone from the RJ11 socket on the router? Setup would be like this: RJ11 to RJ45 adapter plugged into the router then an RJ45 cable going from that adapter into the powerline sender.

2024年3月16日 · My question is, if I then plug in another filter into my router, can I connect a cable from it to the original deactivated landline socket. So that I can use my other landline phone upstairs, which I am hoping will work with the router?

2009年3月7日 · You can either have a single filter on your master phone socket, with all subsequent phone extensions plugged into the phone side of the filter and the ADSL modem plugged into the broadband side of that same filter. Alternatively, you must have a filter fitted on any of the phone sockets, master and extension, that you connect any phone or modem.

2024年6月11日 · How do I get all my old phone ports connected to the router? If you're on 21cv virgin have piggyback splitters that you can plug into any extension or the master socket which will connect them up. Unsure as to whether you can order these through customer service or if youll need an engineer for it.

2021年5月22日 · Which virgin broadband hub do you currently have? The superhub 3 and 4 have sockets for a phone. However they are RJ11 sockets, so they might just mean that they need to send you a little RJ11 to BT socket dongle. There's nothing more to their VoIP service than that.

VM does not offer VoIP, all they are doing is wiring users current telephone through their hubs rather than a directly wired connection. If you want true VoIP you must buy a plan from someone else. The part was an adaptor to go into the router and the phone connected into that. So that why I thought VM would be supplying the adaptor.

2009年8月16日 · You don't need any filters for Virgin media phones - as the phone line is different to the cable modem feed (phone connector similar to Bs, but cable modem has a small co-ax connector) unlike adsl which share same BT lines