2023年1月8日 · Just another iteration of the v0. Nothing out of the ordinary, just what you would expect from the Voron Team: Look into the community feedback and mods, think about what could be improved and throw it all together... But they don't stop there, they have to make it awesome!^^ Great job, guys!

2024年3月9日 · One complaint I have with my brand new V0 is that it takes about 10 minutes to heat the bed to 105 C. Ten minutes is not bad but I'd be happier with a 100W heater. Doing that with 24V DC would stress the power supply but using AC mains power, I'd bypass the power supply (and have more DC power available for adding LED lights).

2024年6月10日 · I had gotten this worked out eventually with help from some members of the voron discord. I eventually got a really good result by doing the following: - added larger washers to the sops of the springs so they seat squarely on all corners - add 2 full knobs rotation (cranked them down all the way) - Z_ENDSTOP_CALIBRATE - 3 Screws calibration

2022年11月22日 · I am installing a Nevermore Micro V4 on a V0.1 with BTT SKR Mini E3 V2.0 and wondering if there any way to connect and control the fan via software as FAN 0 and FAN 1 are obviously taken?

2023年7月20日 · I upgraded the firmware to v0.11.0-235 before I started my first print. I did some more testing and noticed the Load on the Board maxed at 100%, it would stay like that until it timed out. I have disconnected it from the USB port, so that I …

2024年12月10日 · Starting to wrap up the build of my V0.2r1, LDO kit, and I am running into a frustraiting issue with klipper losing connection with mcu 'mcu'. It doesn't happen on smaller prints, maybe 30 minutes or less, but anything more than that it is like playing roulette. Half way through a 3 hour print...

2022年12月22日 · Im about to build a Box Zero so will need a bed probe rather than a fixed Z endstop. I've installed Tap on my V2 and the accuracy is better than any other probe I've tried on my printers in the past. I've read about Boop for the V0 on Discord which I'd like to incorporate from build. Is there...

2023年8月7日 · Good morning, as the title suggests I've got an odd issue. If we SWAP motors A/B on the board so that they are wired with A to motor 0 and B to motor 1 the x and y home and move in the correct direction. However the two axis are inverted this way (X is front to back while y is now right to...

2024年4月14日 · Fabreeko Honeybadger V0 Metal Toolhead Carriage might be a good upgrade; Lik builds it with the Formbot printed parts. 1515 extrusions are the LDO-styled “D” and not the MakerBeam “T” channel. Lik ordered the Formbot printed version of the parts; tuct builds it with EBB36 and CANbus; Mxbrnr builds Darth Voron; Perkeo builds the v0.2r1 kit

2023年3月1日 · The Voron Forum has chosen to be supported by selected banner ads from our trusted vendors. We find it sneaky to rewrite links for profit, so we don't do it and don't allow others to either. That banner is the only advertisement that will ever appear.