2014年5月1日 · Looks like a newer, upgraded version of my craftsman 10". It has the same basic chassis configuration, but only has a 4-5/8" cutting height. The WEN also has a better fence, and mine didn't come with a stand. But the craftsman has the same motor. I use it for everything you'd normally use a bandsaw for, except resawing wider stock.

2016年8月5日 · I took delivery of the WEN 10" band saw and taking time to set it up right (first timer on bandsaws). Been looking at alignment of the guide bearings. With the upper blade guide do you find you do slight side to side bearing adjustments as needed if you lowered or raised the blade guide? Kind of seems necessary if I wanted less blade touch or ...

2018年1月24日 · Hi all, I just purchased a 3962 band saw and am attempting to install a 1/4" blade. The 3/8" that came with it works great but the 1/4" tracks off the wheel no matter what tension or alignment I make. Anyone had luck with a 1/4" blade.

2025年2月24日 · This type of thing is what I was going to say. Similarly, I believe Buzz from the Melvins tends to tour with guitars using this setup with the neck rolled back, and I seem to recall him saying his thought process is to have the bridge pickup solo'd as the loudest/highest gain setting, the rolled back neck as the quietest/lowest gain setting, and the middle toggle ending up somewhere in the middle.

The premier online community for bass players. Bass guitar and double bass forums, classifieds, gear reviews, store, and more.

2024年10月1日 · 3,962 5,557 Germany, Nordrhein-Westfalen. Oct 1, 2024 #2 Oct 1, 2024 #2 Any modes of 7-note scales with an ...

2004年4月7日 · I have an Affinity P-bass that has a buzz when I turn up the tone pot. It goes away with the treble backed all the way off, and is unaffected by touching the strings. At first i thought it might be a ground problem in the house wiring, but I unplugged the bass and the amp is …

2014年3月29日 · What is the best way to install tuners onto a brand new neck with no holes? I'm trying to tap the screws in a bit to get a starter hole and then screwing them in. I've tried manually and with a drill. Either way, this is a very tedious and …

2010年12月22日 · Good day Talkbass. This guide is not meant as a slight on the already great guide on here, I have just found myself repeating the same post over 100 times so I figured I might as well make my own guide and link it from here on out. I am far from an electronics expert; I like to consider myself...

2009年10月1日 · I have not tried them but I have heard them and they did sound very nice. I originally wanted the gold flats for my 5 string but unfortunately they didn't make the flats in a 5 string set, so I wen't with rounds. Like the sound, like …