Using water and the degreaser dish soap, wash off all grease and oils that normally buildup on cabinetry over time. Rinse twice with fresh water and sponge and allow time to thoroughly dry.… 展开

Scuff sand cabinets, doors, etc., and apply a test sample of primer in an inconspicuous area. Allow to dry properly and test for adhesion. Because of the exceptional adhesion of this … 展开

Once you have established good bonding/adhesion, you can prime the entire surface. Keep in mind that any surface prep short of clean, dry and dull will lead to poor adhesion, and m… 展开

Brush or roll on the first coat of paint and let dry. Add two additional coats to protect the surfaces from daily use. Remove the tape by pulling it away from the wall at a 45° angle.… 展开