2024年5月15日 · Adjusting iron sights on a Winchester Model 94 can be done by following a few simple steps. First, ensure the firearm is unloaded and point it in a safe direction. Next, use a proper sight adjustment tool to make small adjustments to the windage and elevation screws located on the rear and front sights respectively.

2007年5月4日 · Use a reference line like Winchester said to keep track of how far you're moving the sight. I just use a good sharp lead pencil myself, then wipe it off when I'm done. It's actually very easy to do, and if you use a case head, it's virtually impossible to hurt anything.

This video shows how to remove and replace the rear sight on a Winchester 94. It also shows how to adjust it for Windage. Viewers will see that the elevator is missing. This sight was bent...

Positive side ejection (for better ejection when using a scope). Adjustable rear sight mounted on the barrel (not the tang). This manual includes instructions for standard caliber models as well as Big Bore models. Models may have large lever loops or standard levers.

Adjusting elevation on most Model 1894 sights requires you to lift up the rear blade on your rifle’s rear sight with your fingers and move the notched sight elevator forward or backward (Figure 24).

Your fire­arm can be adjusted to shoot higher by moving the rear sight elevator backward by one or more notches. In order to shoot lower. the elevator can be moved forward (Figure 5). By gently tapping the rear sight base (where fastened to the barrel) …

2012年8月26日 · My newly purchased model 94 (vintage 1970's is shooting about 1-2 inches right with both Remington 150 grain core lokt and Federal 150 grain soft points. The Remington rounds definitely pattern better; but still shoots to the right. Is it …

This owner's manual provides instructions for operating and maintaining the Winchester Model 94 Lever Action rifle. Learn about safety features, loading and unloading procedures, sight adjustments, and more.

Do not bend the rear sight, unless your straightening it. It gets tapped side to side in it's dovetail to adjust windage. Move the rear sight in the direction you want the bullet to go using a flat brass punch. Zero a .30-30 at 100 yards.

2019年9月27日 · This video shares a useful method of setting your rifle's open sights. The sample rifle is a Model 94, but the techniques are applicable to many others as well. The method used enables you to...