2022年6月29日 · For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb. For preloader mode, don't press any hw button and connect usb. If it is already connected and on, hold power for 10 seconds to reset.

1 天前 · BROM/EDL; Format Data + FRP; Wipe Keep Data; FRP; Unlock MiCloud; Disable MiCloud; Fix Baseband; Orange MSG; Erase EFS; Backup EFS; Write EFS; DemoLive; UBL; Relock UBL; PFT 3.0 Update – March 10, 2025. New device support added! Newly Supported Devices: Samsung S22 5G (BIT 6) UFS; Samsung S22+ 5G (BIT 6) UFS;

2023年7月29日 · MTKClient allows you to unlock bootloader not via fastboot, but by directly writing modified seccfg using the brom mode. You can still flash TWRP over the incomplete stock recovery (but as there is no one for this phone, you need to port it or compile it yourself )

Once the mtk script is running, boot into brom mode by powering off device, press and hold either vol up + power or vol down + power and connect the phone. Once detected by the tool, release the buttons. These chipsets use a new protocol called V6 and the bootrom is patched, thus you need a valid da via --loader option.

2024年12月31日 · After Operation: Erase FRP And Wipe The device stops at the logo It happened to me on many devices, especially old ones Selected model: Wiko Mediatek Operation: Erase FRP And Wipe Software version: 7.10 Erasing of partitions can damage your device. Make sure that you have a backup created. Continue? YES Work ID: 55719456 Connect phone in …

2023年10月14日 · Selected model: Vivo Mediatek Operation: Erase FRP And Wipe Software version: 5.13 Erasing of partitions can damage your device. Make sure that you have a backup created. Continue?

2024年9月28日 · To boot into BROM mode you have to hold all the buttons and connect USB, or you can just connect the USB while the phone is completely powered off to enter preloader mode (mtkclient will automatically crash it to BROM mode).

2021年9月30日 · How you boot into BROM varies with the device so look it up for your model. To re-lock Bootloader wipe seccfg or run For older mtkclient versions:

2024年10月7日 · Selected model: Samsung SM-A035M (Samsung Galaxy A03 ) Operation: Erase FRP And Wipe Software version: 7.5 Work ID: 44730139 Connect phone in BROM

2024年2月12日 · Since you flashed stock F50 as you said, my guess is to wipe it in the recovery data and then it should boot. If that still doesn't work after the wipe, you can try to fix Brom by flashing the Brommode fix under Fastbootd. Then your device should work under MTK client and you can flash a backup.

Resetting FRP (Factory Reset Protection) in Brom (Boot ROM) mode can be a crucial step when dealing with devices that are locked due to FRP. The "Reset FRP" option in Cheetah Tool Pro allows you to bypass FRP protection and restore access to your device.

2024年8月16日 · Selected model: Samsung SM-A035F (Samsung Galaxy A03 ) Operation: Wipe Partitions Software version: 7.0 Erasing of partitions can damage your device.

3 天之前 · Oppo - Factory Reset Brom mode MTK new security format data safe | Flash frimware | Extract OFP File - Remove Knox | Wipe EFS - Backup/Backup NVRAM Vivo - Factory Reset | Erase Frp | Remove Demo | Wipe EFS | Factory Via Meta Mode | Safe Format Without Lost Data | Read - Write NVRAM - All One Click

2021年2月16日 · I noticed it was possible to communicate with the BROM with a UART interface at a baudrate of 115200, 8 bits, 1 stop bit, no parity and no flow control, I found a document yesterday explaining that a few commands could be called like 'Version', 'Start', 'Jump', but nothing happens when I try with PuTTY,

2024年3月7日 · Connect phone to [PC] in BROM/PRELOADER Mode Waiting for device... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0] You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory. Device found at COM4 [BROM ...

4 天之前 · Oppo - Factory Reset Brom mode MTK new security format data safe | Flash frimware | Extract OFP File - Remove Knox | Wipe EFS - Backup/Backup NVRAM Vivo - Factory Reset | Erase Frp | Remove Demo | Wipe EFS | Factory Via Meta Mode | Safe Format Without Lost Data | Read - Write NVRAM - All One Click

2024年12月2日 · Operation: Erase FRP And Wipe Software version: 7.0 Erasing of partitions can damage your device. Make sure that you have a backup created. Continue? YES Work ID: 38915043 Connect phone in BROM Mode Waiting for device... OK Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]

2024年5月5日 · When the redmi 13c twrp is stuck in logo, not possible to use the adb or fastboot. Computer is not detecting the device at all. Only possible way to recover the device is to enter into brom mod and do the necessary things and flash the firmware. Anyways i did fix his issue yesterday. Now his phone is working fine.

2025年3月7日 · Oppo - Factory Reset Brom mode MTK new security format data safe | Flash frimware | Extract OFP File - Remove Knox | Wipe EFS - Backup/Backup NVRAM Vivo - Factory Reset | Erase Frp | Remove Demo | Wipe EFS | Factory Via Meta Mode | Safe Format Without Lost Data | Read - Write NVRAM - All One Click

2025年2月14日 · Oppo - Factory Reset Brom mode MTK new security format data safe | Flash frimware | Extract OFP File - Remove Knox | Wipe EFS - Backup/Backup NVRAM Vivo - Factory Reset | Erase Frp | Remove Demo | Wipe EFS | Factory Via Meta Mode | Safe Format Without Lost Data | Read - Write NVRAM - All One Click