在新选项卡中打开链接
  1. Copilot 答案

    How to Make Wind Spinners: DIY Woodworking …

    • Cut the strips to 7″ (18cm) in length. A miter saw can be used to speed up this process. Notice how a stop block is clamped to the miter saw below. This allows me to cut multiple pieces at once without stopping to … 展开

    Materials Needed For Wind Spinners

    65 – 3/4″ x 1/4″ x 7″ (2cm x  0.6cm x 18cm) pieces of wood.
    1 –  1/4″ (0.6cm) threaded steel rod36″ (91cm) long.
    2 nuts.… 展开

    SunCatcherStudio
    Step 3. Drill Holes in All Strips

    Drill a hole 1/4″ (0.6cm) or slightly larger than the threaded rod in the middle of all 65 pieces of wood. Make sure the holes are drilled in the center of the board.This will help ensure the … 展开

    SunCatcherStudio
    Step 4. Prepare The Top of The Threaded Rod.

    Prepare the top of the threaded rod so you can hang your wind spinner. Option #1. Smash the end of the threaded rod with a hammer and drill a small hole in this end. Insert a fishing s… 展开

    SunCatcherStudio
    Step 5. Insert The Threaded Rod Through All Strips of Wood.

    Insert a nut and washer on the top of the threaded rod. Then insert the rod through all strips of wood. Finally, place a washer and a nut on the bottom then lightly tighten the nut.… 展开

    SunCatcherStudio
     
  1. 某些结果已被删除