API 5L X60 is a common high grade pipe material in API 5L specifciations for oil and gas transmissions. It’s also called L415 pipe, which named by yield strength minimum in 415 Mpa (60,200 psi). It covers manufacturing types in seamless (hot rolled and colde rolled), and welded in ERW, LSAW, SSAW (HSAW).

①对于产品 (钢管)等级PSL1：碳的规定最大含量每降低0.01%，Mn的规定最大含量就可以提高0.05%，对钢级≥L245或Grade B且≤L360或Grade X52的钢，Mn含量最高可增至1.65 %；对钢级 > L360或Grade X52 且 < L485或Grade X70的钢，其Mn含量最高可增至1.75 %；对钢级L485或Grade X70的钢，Mn含量最高可增至 2.00 % 。

American Piping Products stocks API 5L pipe in grades B, X42, X52, X60, X65 & X70. ANSI / API 5L specifies the manufacture of two product levels (PSL1 and PSL2) of seamless and welded steel pipe for the use of a pipeline in the transportation of petroleum and natural gas.

BMW X6 讓您無論在道路或鬆軟的路面上都能安全、快速地行駛。 可供選擇的四種越野模式會依據目前的路面對全時四輪驅動系統 xDrive 進行更精確的調校,讓車輛在砂地、石子路、碎石地 …

For intermediate grades up to Grade L320 or X46, the tensile strength shall be ≤ 655 MPa (95 000 psi).

For each reduce of 0.01% Carbon Max, an increase of 0.05% of maximum Mn is permited, up to a maximum of 1.65% for grade ≥ B or L245, but ≤ X52 or L360; Up to max 1.75% for grades above L360 or X52, but below L485 or X70; And up to 2.00% max for grade X70 or L485. Unless otherwise agreed, Nb + V ≤ 0.06%. Nb + V + Ti ≤ 0.15%.

U is the specified minimum tensile strength, expressed in megapascals (pounds per square inch). g Lower R to,5 /R m ratio values may be specified by agreement for L690 or X100 and L830 or X120 pipe.

ENGINE HIGHLIGHTS OF THE BMW X6. For maximum traction, driving dynamics and safety, the BMW xDrive all-wheel drive system provides variable drive power distribution to the front and rear axles. The Adaptive M suspension Professional* combines various technologies for optimum driving stability and dynamics.

新X6将在国内继续提供三款车型：新X6 xDrive30i M运动套装，新X6 xDrive40i M运动套装，新X6 xDrive40i 尊享型 M运动套装。30i为配备2.0T四缸发动机的车型，40i为配备3.0T六缸发动机的车型（48V轻混）。其中，xDrive40i M运动套装车型在泰国生产，预计6月份投产。

Parallam® PSL columns are strong and consistent. Our manufacturing process uses veneer strands, allowing a significant percentage of each log to become a high-grade structural member. Combine their great load capacity with the strength of …