2019年6月12日 · I found a sample XPR6350 codeplug in the Motorola software but its for the VHF version. Wont work. Still need a UHF XPR6350 UHF codeplug. Any old thing will do as long as its a 6350.

2014年9月20日 · Hello, I just took over the radios here at my building, I have 43 XPR6350's I have a purchased copy of CPS and after importing all my radios and seeing what is programmed in. One of the main concerns I have is the Firmware. I have approx 1/2 at R01.06.10 and the remaining 1/2 at R01.06.20...

2016年6月30日 · Will the Motorola XPR6350 UHF work on amateur radio DMR repeaters? Can the Motorola XPR6350 UHF operate on simplex frequencies in digital mode? Thanks

2021年8月31日 · I'll preface this by saying I have been repairing XPR 6 and 7 series radios for the past year as an amateur repair tech. Mostly swapping parts like channel and volume pots. I've been getting low power readings (sub 3w) on my service monitor on a large batch of radios. Since I'm new to this type...

2016年3月6日 · Hi, Just picked up a used Motorola XPR6350 plus accessories. The radio was previously used in S.Texas oil fields. I have several questions: 1) I've only used CB radios...several years ago... Is the XPR6350 a good device? 2) Does the radio need to be programed? 3) In general, what is...

2023年11月19日 · I have 10 XPR6350 units. All units are the same model and software (fw# R01.12.17/cp ver# 13.02.03). I was able to program a codeplug with 6 channels and clone it to 9 of the 10. Those 9 work fine. All 10 have different id#'s and names programmed. The last one says it completed successfully...

2024年7月21日 · Hello, I recently acquired an XPR6350 and am currently looking to program it. I have a cable, but I am curious as to which CPS to use. On the radio it says it has firmware "R01.08.10" although I cannot confirm if it's been upgraded as I cannot read it. Any help would be greatly appreciated.

2022年2月16日 · Hello everyone, I am a complete newbies when it comes to radio programming, I recently found a bunch of XPR 6350's thrown into a dumpster (I work for a local big pharma that apparently got an upgrade on their radios). Now I'm a las year CS student, and I know how to get around programming, but...

2021年1月29日 · Hi Team, I recently picked up a pair of radios to program my biz frequencies into, and was curious to see if I could get the channel to work on digital versus analog (original radios were all CP200's and an analog repeater, which we have decommed long ago and just use simplex on the older...

2025年1月1日 · Trying to figure out how to copy the settings from one radio to another, and having issues with the CPS software. I have a working XPR 6350, but I am unable to even read it (using the attached USB programming cable). I have version R09.11 of the CPS software installed. Every time I plug in the...