准确的探针 z 偏移 (z_offset)是高质量打印的基础。 z 偏移是探针触发时探针和喷嘴之间的高度差。 Klipper 中的 PROBE_CALIBRATE （探针校准）工具可用于测量这个值——首先，该工具会运行一次自动探测以获取探针的 z 触发位置，然后需要手动调整Z坐标以获取喷嘴碰触到热床时的 z 高度。 然后将根据这些测量值计算探针的 z 偏移。 首先进行三轴的归零，然后将喷嘴移动到热床的中央位置。 转到OctoPrint的“命令行（Terminal）”子页，输入 PROBE_CALIBRATE 以启 …

Imitating human behavioral patterns with derived, abstracted actions and processes, the kinetic sculpture Offset XYZ tries to establish communication with the human observer.

2024年7月9日 · I would like to have a fully automated XYZ-offset calibration macro for my IDEX printer. I want each nozzle to touch a cylinder. The nozzle is grounded and the cylinder is connected to an input, like a limit switch. The macro should move to a predefined position. There it should first touch off z.

YouTube Hier erkläre ich euch, wie Ihr einen automatischen XYZ Abgleich der verschiedenen Druckköpfe machen könnt.

2023年7月19日 · As I almost finished my Anycubic i3 Mega IDEX mod (GitHub - Life0fBrian/Anycubic-i3-Mega-IDEX-mod: This mod converts the Anycubic i3 Mega into an IDEX 3D printer.) it was time to research on how to properly calibrate/determine the offsets of the two printheads/nozzles.

Setting the Z Offset in Klipper doesn't have to be hard. Here is a quick guide to tuning your X, Y, and Z Offset. This is based on the instructions found at:...

2023年1月19日 · Correctly setting the X, Y, and Z offsets is a vital step of the 3D printing process, as failing to do so causes issues such as the printer printing off the bed or in the air; and the printhead bumping into the bed.

2015年1月29日 · The XYZ of the tooldata defines where the TCP is in space in relation to the center of Axis 6, but not its orientation. That comes from the rotation (q1, q2, q3, and, q4).

2023年10月2日 · Klipper needs to know from its printer.cfg settings how far the X and Y axes can safely move without hitting the printer’s frame. It also needs to know where the origin (X=0 / Y=0) is. This origin is the beginning of the usable printer bed.

2022年4月26日 · If you are on CUSTOM it uses 0 offset by default, or whatever you configured for the Custom entry. Assuming you set yours to Custom, set it to OB XYZ Probe Plus