Xol Toolhead is the evolution of 'Mantis Xol 2' (https://github.com/Armchair-Engineering/Mantis-Xol). Aimed at modularity and quality of life improvements for installation and serviceability. We have left the mantis carriage behind, and thus are now just Xol sans Mantis. Don't worry, it's still a bit ugly. We wouldn't fix that. Project lead: DW-Tas

2024年6月19日 · Xol-Toolhead can collide with the stock voron front idlers for Trident and 2.4 when the toolhead is in the front corners of the build area. This can cause also issues with the homing sequence when homing X if the toolhead is at the front of the gantry on Y.

Originally a project to slap 5020 blower fans onto Mantis, this toolhead variant started as an attempt to improve parts cooling, spurred on by Derpimus' noted cooling woes on his DOOMCube.

2023年12月12日 · Anyone have familiarity with https://github.com/Armchair-Engineering/Xol-Toolhead? It claims to be substantially higher than the stock XW2/ SB at ~250g. I have a pretty light setup - using a Voron Revo and aluminum and titanium screws with an SB2040 that clocks in at 397g (I think 430g is what is quoted for stock).

The Xol toolhead customisable kit. Choose your fans, heatsets, pins and regulators if required and it will be all sent direct to you! Please note that 10% of all sales go directly to supporting the project. Github here for the Xol documentation and STLs

2023年3月22日 · For anyone that's built up and are using the Mantis XOL 2 toolhead, what extruder did you decide to go with? Plus any specific reason as to why you…

Built for Xol-Carriage - can work with Voron Tap / Standard Voron CW2 carriage. A printer that fits either Xol carriage, or a standard voron CW2 or Tap carriage. X/Y gantry joints that are within the same size as standard Voron 2.4 or Trident X/Y joints. See …