Taking into account industry standards and basic safety recommendations, bridging shall be installed for all ‘Z’ or ‘C’ 100 purlins wherever they span more than 2 metres, for all 150 purlins wherever they span more than 3 meters, and for all 200, 250 and 300 purlins wherever they span more than 4 meters.

All voestalpine Metsec Z-section product is manufactured from pre hot dipped galvanised steel to BS EN10346:2015, Z275 coating and with a minimum yield strength of 450N/mm². Voestalpine Metsec Z Purlins Size & Dimensions. For Any Further Information Contact …

This document contains the inputs and analysis of an 8 meter long Zee section beam with a 2.4 mm thickness. It includes the section properties, material properties, support conditions, applied loads, and load combinations analyzed.

2020年12月8日 · Z Section Weight: Overall Width: Overall Height: Flange Thickness: Root Radius: Moment of Inertia - XX Moment of Inertia - YYAustralian Steel Sections

We offer steel Z purlins in a variety of thicknesses and depths, tailored to meet specific load-bearing requirements. The choice of thickness and depth is determined by the span the purlin covers and the required weight capacity. We also manufacture and supply high-quality galvanised Z purlins designed to complement our steel roofing sheets.

Z sections of the same and diferent thicknesses can be lapped in any required combination. Z sections may also be used over simple spans and for shorter spans they may be used continuously over two or more spans without laps. Z sections with one lip turned outward may be used in simple or continuous spans with the ends butted.

They are primarily used to provide lightweight, economical, efficient roofing and cladding support systems for framed structures. Apex Purlins and Girts are available in a range of different sizes and configurations. C-sections have equal flanges and may be used in single spans and unlapped continuous spans in multi-bay buildings.

ZEMAN – Z – PURLINS are thin-gauge lightweight construction elements produced by roll forming which are mainly used as roof purlins, but also as secondary girders. Profile forms particularly aiming at the optimization of the carrying capacity values render the exceptionally favorable weight / capacity ratio of these construction elements.

Z Purlin Thickness: 1.2-3.1mm, Material: Galvanized (GI), Cold Rolled (CR) Width : any size within 120-300mm Height: any size within 30-80mm Lips: any size within 10-20mm Inner Angel: 135 & 90 degree Z Purlins are made using cold-formed or rolled sheets for supporting roof. The flexible shape of these beams facilitates various designs solutions.

Stramit Exacta ® C&Z Purlins and Girts will give excellent durability in most applications. GALVASPAN ® steel is not recommended for use within 450mm of moist soil.