The MIS motor from JVL is the complete motion solution Stepper motor with integrated controller. All necessary components in one unique compact unit.

The integrated ServoStep motors from JVL. A wealth of possibilities in a NEMA23 series of the world´s most compact stepper motors with the highest micro stepping resolution, closed-loop 3000RPM and up to 3.1Nm.

ServoStep MIS is a series of integrated stepper motors with servo control (closed-loop) and up to 3000 RPM. It consists of NEMA 17..23..34..43 size motors with holding torques from 0.18 Nm up to 25 Nm.

JVL专门开发了步进电机，编码器和电子设备，使它们一起形成一个封闭的单元，其中动力驱动器和控制器安装在电机内部的封闭区域中，防护等级达到IP67，不锈钢轴AISI303作为标准配置。 所有型号。 在无线蓝牙，WLAN或Zigbee或工业以太网Profinet之间进行选择，以太网/ IP，EtherCAT，Powerlink，MODBUS TCP / IP，RS485和PLC内置为标准配置。 请注意，驱动器和控制器也可以作为单独的单元SMC85使用。 德国JVL MAC电动机 的基本思想是最大程度地 …

The MIS motors can be delivered in sizes of 1.1 to 2.9Nm, the MIS231 to MIS234 range, 2.5 to 7.2Nm, the MIS340 to MIS342 motor, the MIS430 to MIS432, 10.0Nm to 25.0Nm. Adapt your motor to your application with firmware

The integrated ServoStep motors from JVL. A wealth of possibilities in a series of of the world´s most compact stepper motors with the highest microstepping resolution. 4 sizes are available. MIS340 - 3.0/3.0Nm

The MIS motor – the complete motion solution. Stepper motor with integrated controller and PROFINET interface. All required components in one compact unit. JVL offers fully integrated stepper motors with PROFINET in the range of 0.15 to 25 Nm and in the sizes NEMA17, NEMA23, NEMA34, and NEMA43.

JVL is the leader in integrated stepper and servo motors with highly innovative solutions. Ingenious modular interface also with Industrial Ethernet.

JVL: Intelligent Motors (MIS231 / MIS232/ MIS234 Series) The basic idea in the MIS motors is to minimize the installation costs but also to make a component that is much better protected against electrical noise which can be a typical problem when …

Adapt your motor to your application with firmware The JVL MIS Integrated Servo Motors can be delivered with different numbers of M12 connectors depending of the application. The MIS17x and MIS23x motors can be delivered with RS485 interface and PLC built-in and optional CANopen.