This document will hopefully explain how to do just as the title says: Change courtesy tones based on calling DTMF (scripts). Once that is achieved, the magic of Linux can take over and the scripts be called by commands, cron jobs, or DTMF tones. This script assumes you can walk yourself around Linux but will provide guidance on specific steps.

2021年4月30日 · Command mode means send all received DTMF digits to the node number specified (bypassing the local command decoder). Send # to exit command mode, and restore local command decoding. Disconnect from link. Connect to node in Rx only mode. These are suggested, but are typically configured by default on ASL nodes. *80 Force System ID.

2022年1月25日 · This howto explains how the DTMF function decoder works in app_rpt and how to add and change DTMF function codes. The function decoder's job is to collect DTMF digits until a match with a command is found.

2024年11月12日 · The rpt.conf file contains the node configuration, telemetry (beacons), morse code, audio levels, DTMF commands, etc. The modules.conf file configures the modules that will be loaded at start-up. It is necessary to put load in front of the interface type :

2024年6月29日 · DTMF Commands. DTMF commands are placed in any one of three named stanzas. Function stanzas control access to DTMF commands that a user can issue from various control points. The fuctions stanza - to decode DTMF from the node's local receiver. The link_functions stanza - to decode DTMF from linked nodes.

2023年4月3日 · I only noticed tonight when I had someone trying to control a remote link, they couldn’t because DTMF was being supressed. dtmfpropagate… Is there anyway to pass DTMF tones locally on a repeater controlled with Allstar?

2019年11月4日 · We have tried 2 different methods to pass DTMF over our repeater system to control our SRS controllers. (propagate_dtmf and pager tone using COP 48) Our goal is: hit #123 on any repeater to Allstar, for #123 to come out intact on every port, including ASL endpoints (places where an RTCM (ASL node) is connected to a controller port.

2025年1月10日 · Once connected, you can issue DTMF codes to connect/disconnect, and use the PTT button to transmit. Digital Link DTMF Tuning Installation and Configuration. Clone this repository to your AllStar node /opt directory, via:

2024年9月1日 · Adding the DTMF command into the Node. The final part is to add in the DTMF commands into your node so that when a user enters the correct DTMF tones it will run the script you just created. On my node, I have *840 setup to enable parrot mode and *841 to disable it.

CDARIN SYSOPS DTMF COMMANDS. The following commands can only be issued by CDARIN Admins with access to ASL MAIN Allscan Dashboard. All audio spots will play on private node 1004, which is linked to public node 431422. Once the system is fully operational, the ASL main node will be automatically linked.