F200 A 110V: These RCDs, function the same as normal F200 A type RCD. The only difference is that the performance function of a test button of this device for a customer is at 110V. Easy to install - Terminals equipped with fail-safe features to avoid improper installation. A double slot for connection with cables and PS busbars.

RCD blocks are residual current devices suitable for assembly with a standard MCB. The residual current operated circuit-breaker obtained in this way maintains both the electrical characteristics of the MCB and those of the RCD block.

2020年6月5日 · Regulation 411.3.3 applies and a 30 mA RCD is required for socket-outlets rated upto and including 32 A. RCDs may also be required because of the cable route to the socket-outlet (e.g. Regulation 522.6.202) or because of a requirement of a Part 7 special location.

Here at Protek UK we supply a range of quality 110V 2 Pole RCDs for use in consumer units and enclosures.

The ABB RCBO is a combined MCB/RCD that provides protection against short circuit, thermal overload, and earth leakage. It has a breaking capacity of 10kA at 230VAC and is designed for commercial and industrial use. The RCBO is 1P+N (single pole + …

Combined RCD/MCB Devices PKNM-110VAC, 1+N-pole • High-quality residual current device / minia-ture circuit breaker combination, line voltage-independent • Contact position indicator red - green • Guide for secure terminal connection • 3-position DIN rail clip, permits removal from existing busbar system

It assures protection against the effects of sinusoidal alternating and direct pulsating earth fault currents, protection, against indirects contacts and additional protection against direct (with sensitivity = 30 mA) contacts. Operating voltage of circuit …

A range of all-insulated, IP66 rated, RCD protected socket outlets to BS EN 60309-2, with or without mechanical interlock, in current ratings of 16A, 32A, 63A and 125A and voltages of 110V, 230V and 400V.

The Schneider Electric A9V01663 is an Acti 9, 1P+N, add-on residual current device which has a rated current of 63A, an earth-leakage sensitivity of 30mA and an instantaneous earth-leakage protection time delay. This current device has a trip indicator, a clip on mounting mode with a DIN rail mounting support and has tunnel type terminals.

Low Voltage (230V and 400V) and Reduced Low Voltage (110V) distribution equipment for permanent installations. Step-up and step-down power transformers in ratings from 100VA to 250kVA and voltages from 12V to 3300V. What are you looking for?