15/16 - 12 THREAD CHARTS • JIC – SAE • Metric/International VISIT US AT BRENNANINC.COM. Created Date: 2/12/2010 2:12:48 PM ...

Used to measure the amount of threads per inch, as well as the thread to thread spacing in metric applications. Before you start measuring the threads of your fluid pipe or tube, ensure that they are in good conditions. Distorted or worn out threads can give you inaccurate measurements.

SAE O-ring (O-Ring Boss) are straight thread ttings that seal using a O-ring between the thread and the wrench ats of the tting. The O-ring seals against the machined seat on the female port. O-ring ttings can be either adjustable or non-adjustable. Non adjustable ttings are screwed into a port where no alignment is needed.

For complete specifications refer to SAE Standards J1926-1 for straight thread ports and J518 Parts 1 and 2 for 4-bolt flange ports. **NOT AN SAE STANDARD. INSERTATM PRODUCTS, I STANDARD.

2023年2月18日 · Check out the SAE size chart to know about common thread dimensions including UNC, UNF, and UNEF, as well as types and measurements of SAE threads. SAE threads are often used in conjunction with other types of threads, such as NPT (National Pipe Thread) or BSP (British Standard Pipe) threads.

Nominal tube OD is shown for the standard inch sizes and the conversion to equivalent millimeter sizes. Figures are for reference only, as any boss can be used for a tubing size depending upon other design criteria. See SAE J846 for more information.

SAE Dash Size Thread Decimal 2 5/16-24 0.313 3 3/8-24 0.375 4 7/16-20 0.438 5 1/2-20 0.500 6 9/16-18 0.563 8 3/4-16 0.750 10 7/8-14 0.875 12 1 1/16-12 1.063 14 1 3/16-12 1.188 16 1 5/16-12 1.313 20 1 5/8-12 1.625 24 1 7/8-12 1.875 32 2 1/2-12 2.500 05/2016 NPT O.D. Pipe Size Threads / Inch 0.313 1/16 27 0.405 1/8 27

SAE information is provided as an aid to designers. For complete specifications refer to SAE Standards J1926 for straight thread ports and J518 JUN93 for 4-Bolt flange ports. SIZE CODE

2023年4月12日 · 在北美最常见的直螺纹形式是un/unf螺纹，一般也可称之为sae直螺纹。这种螺纹的接头在连接液压系统时，最常见的连接方式是符合sae j1926标准，即在油口处加工出一个沉孔，并使用o型圈进行密封(如下图)，而螺纹只提供紧固力。

7/16 – 20, 1/2 – 20, 3/4 – 16 & 7/8 – 14 are the same thread form as JIC 37° flare. Some fittings in these sizes have both JIC 37° & SAE 45° seats. What are SAE fittings? Society of Automotive Engineers (SAE) fittings are commonly used in refrigeration, automotive and low-pressure applications. These include: