2022年2月18日 · Your LAN subnet is on the 192.168.0.0/24 subnet, the router (or for the sake the PC) are on the .1 address. Either way, the 192.168.100.1 address is outside of the local LAN subnet, the router will forward the 192.168.100.1 to it's WAN interface, where the computer is able to reach the cable modem on its 192.168.100.1 address. Unless you are using ridiculously …

2024年1月21日 · By default, the new router wants to use 192.168.1.1 as its local IP address. (192.168.0.1 is the address that many modem/routers go for.) If it finds another router it will go for something else, 10.0.0.1 is a regular fallback. So, yes, it is normal behaviour, but it is a bad idea. You can end up with network issues.

2020年4月17日 · The default IP for some of these Extenders is indeed 192.168.1.250/24 to be correct. The default subnet mask is 255.255.255.0, so very similar to many home networks.

2016年11月27日 · I created a workaround for my firewall problem: I changed the 'Scope', 'remote IP addresses' of the outbound firewall rule from the subnet notation: '192.168.0.0/12', to the range notation: '192.168.0.0-192.168.0.255'. Thus, I was able to create an effective 'Scope' of '192.168.0.0/24' by that indirect method. I tested it by using the 'ping' command: I was able to …

2022年9月2日 · I actually tried that already, but I tried it again (For me the option is called Speed & Duplex) I set it to the max value of 1.0 Gbps. I also disabled the 'Auto Disable Gigabit' option and it still shows a link speed of 10/10 (Mbps) and when I run a speed test both values come in at just under 10 Mbps.

Active Connections Proto Local Address Foreign Address State TCP 127.0.0.1:49721 DESKTOP-G836CJB:49722 ESTABLISHED TCP 127.0.0.1:49722 DESKTOP-G836CJB:49721 ...

2021年9月3日 · What firmware version are you on? What web browser/device are you using to access it? Does it load any of the interface at all? Good advice above.

2023年6月29日 · Hi there, I activated developer mode an hour or so ago and have not been able to access the Decive Portal in order to deploy applications/games Getting this out of the way now so I don’t get the same response I’ve seen 30 times: I am connected to the internet, and able to browse the internet via Edge while in dev mode I can see the Device Portal’s IP Address I …

2018年5月2日 · 1) I can no longer see my NAS drive in explorer or the admin page by typing local address 192.168.0.5. in chrome. 2) I can see it attached to the router as nas-02-00-0c at 192.168.0.5 3) When I try the admin page via explorer/ chrome it says 'this site can't be reached'.

2024年3月21日 · Have you double-check if your network adapter supports Gbps speeds? And in regards with that, may I know the type of Realtek PCIe GBe Family Controller you're using? You can check that from: 1. Open Device Manager > Expand Network adapters 2. Double-click on Realtek PCIe GBe Family Controller 3.