2017年2月12日 · For Toyota V6 engines, 'Bank 1' refers to the bank in which Cylinder #1 is located. On the 1GR and 5VZ V6's used in Tacomas to date, Cylinder #1 is the front-most cylinder on the passenger side of the vehicle.

2017年6月20日 · Just looking for confirmation, bank 1 is the passengers side of the 1GR-FE given the passengers side has the forward most cylinder (Cyls #1, 3, 5)...

2022年7月3日 · These 2 code indicate that you have a problem with your bank 1 camshaft. You need to open the valve cover and check the chain and both sproket

This service bulletin provides information on the proper identification of engine bank 1 and engine bank 2 for correct A/F sensor and oxygen sensor replacement. 1AZ-FE, 2AZ-FE, 2AZ-FE (PZEV), 1GR-FE, 2GR-FE, 2JZ-GE, 1MZ-FE, 3MZ-FE, 1UR-FE, 3UR-FE, 2UZ-FE, 5VZ-FE, and 1ZZ-FE. Bank 1 (B1) refers to the bank that includes cylinder No. 1.

This page provides information on the proper identification of engine bank 1 and engine bank 2 for correct A/F sensor and oxygen sensor replacement.

2012年2月26日 · Yes - Bank 1 is the bank that includes cylinder #1. Here is a guide to bank / cylinder designations for 5VZ and 1GR engines.

This bulletin contains information that identifies engine bank 1 and engine bank 2 on the following engines: 1MZ–FE, 3MZ–FE, 1GR–FE, 5VZ–FE and 2UZ–FE. Bank 1 (B1) refers to the bank that includes cylinder No. 1. Bank 2 (B2) refers to the bank opposite bank 1. Sensor 1 (S1) refers to the sensor that is located before the catalytic ...

2017年9月3日 · I have got code P0012 (Camshaft Position "A" - Timing Over-Retarded (Bank 1)) several times lately. The Bank 1 Oil Control Valve was clean, worked ok and impedance was within specs, OCV filter was completely clean, camshaft chain was tight and not jumped.

If any DTCs are displayed during a check mode DTC check, check the circuit for the DTCs listed in the table below. For details of each DTC, refer to the page indicated. *: MIL flashes when a catalyst damaged misfire is detected.

2009年6月27日 · This service bulletin provides information on the proper identification of engine bank 1 and engine bank 2 for correct A/F sensor and oxygen sensor replacement.