2012年10月1日 · i am am curious as to if anyone have dyno numbers on a stock 1uz with just nitrous? if so how much power was made on what shot? my goal is to make descent power without having to boost it. thanks Jessie

2006年2月6日 · My conclusion, I have a 1uzfe, I have a nitrous kit (wet shot) from my previous car, and I know the effects of nitrous, my biggest fear is not blowing my motor, but leaving my bottle on and blowing up my car or having an explosion in a wreck. So who ever reads this please turn off your bottle heater! and have a gauge! Hope this cleared it up, Jeff

2008年10月20日 · Does anyone have experience putting nitrous into Lexus/Toyota 1uzfe v8? How much can they take without spending money on anything else but the nos kit? (I don't mind higher risk setups)

2005年2月27日 · I have no experience with Nitrous and am wondering if it would suit my 1990 Celsior. Is anyone running Nitrous on a 1UZ and if so what sort of HP shot can a standard 1UZ and drivetrain handle? The Flea

2017年9月6日 · With a nitrous system we will be able to control the amount of nitrous (and hence the power) by changing the size of the jets in the nozzles. We will equip the nitrous kit with nozzles to provide a gain of around 150kW at the wheels.

2012年10月8日 · i want to stuff the 1uz into my 90 toyota pickup and get rid of the 800lbs yard weight (350 chevy) that's in it. i want to leave it all motor for street-ablilty and gas mileage with a little bit of power (that's where the nitrous comes in about 100-150 shot) nothing extreme but just enough when i want it.

2012年3月13日 · I stumbled on this thread on a drift forum out West last night, it seems fitting and might give you a little insight into the world of the 1UZ. It isn't the most coherent thread, but you'll figure it out.

2017年8月29日 · I was involved with a 1UZFE drag engine back through my old shop STM. We ran that with itb's, ported heads and a set of cams and nitrous and produced around 350 kW atw on a dynapack before it finally broke a piston.

2006年5月18日 · With this new finding I would say it is safe to assume the 1UZ-FE motor can handle an approx. 420rwhp but good tuning is required...Not done yet.....

2007年6月19日 · I should be dyno'ing again in a few days because of the cams I am about to install in my 1uz-fe with Lex...I will have Lex post the results on this thread...That will be my most recent dyno result showing the torque numbers exploding at the wheels with Nitrous...