2013年8月15日 · The result will be a 2.8 that puts out approximately 155 to 165 horsepower. This also applies to 3.1 and 3.4, resulting in more power due to larger displacements. You can go …

2008年3月7日 · dude, do your self a favor and go visit a junkyard. dont buy anything, just browse the 4.3/2.8 trucks and for gods sake before you try to mod a 2.8 learn why GM used the 660's …

2020年7月27日 · I bought a 93 s10 that seemed to run good, but took it for smog and its running rich, i started by doing a spark plug, wires, cap and rotor replacement, than changed out the …

2020年11月22日 · I used the comp cam that had .427" intake lift and .454" exhaust lift on my 1984 carbed 2.8 V6 bored .040 over. I also bumped the compression ratio up to 9 to 1. With a …

2006年6月13日 · swap in a 3.1 or 3.4 from the camaro/firebird. it is a direct swap and you can use most of your parts from your 2.8. Do a search there is a lot of info on it 1992 Chevy S10, 3.1L …

2008年10月28日 · 2000 Red S-Dime features 3/3 drop 56mm t/b ,proform e-fan, FLOWMASTER muffler with Z-28 tip in frt of rear wheel, Auto gauge tach,Viper alarm,p/w with switches in …

2004年2月5日 · You will also need to use the mathing intake (genII intake with genII heads, genIII intake with genIII heads), change to DIS ignition etc. I used an '86 2.8 block for my build, but …

2014年4月1日 · There are very few high performance parts available for the GM 60 degree V6's. I love my 2.8 and want to build it up some too. And plan on upgrading to 3.4 when mine dies. …

2009年4月27日 · well they have to be for the 60 degree block(2.8, 3.4). a 90 degree block ( 4.3L,305,350) bell housing will not fit on the 2.8L or 3.4, which they made a th700r4,4l60e,4l60 …

2005年11月14日 · Since I have seen so many threads about improving power in the 60*, maybe I can offer some tips on helping these engines perform better. First, some factory specs: 2.8 V6 …