2017年7月21日 · In my test results this weekend with my buddys 066 the results are impressive. That stock 2095 lost by .6 seconds to the ported 066, but the funny thing is when I tried my ported muffler 390 husky in the same log it beat both saws by .9 seconds, I couldn't believe it!!! Somemore cutting this week with these saws is planned for the retrial.

2020年8月24日 · Nice example! The 2094 was Jonsered's regular multi purpose chainsaw. The 2095 was purpose built for chainsaw milling and was offered with a 12' carriage type mill that actually worked pretty well. Amazingly when offered with the mill it came with a .325 ripping chain and spur sprocket.

2008年4月13日 · The 2095 is a fine saw and will pull a 36" bar with ease. It was the last saw sold by Jonsered that had any Jonsered design left in the crankcase, muffler, and carb setup. Otherwise the last of the good Jonsereds.

2017年11月29日 · Jonsered 2095. Thread starter Rosss; Start date Nov 29, 2017; Help Support Arborist Forum:

2010年3月17日 · 2095 would use the same topend and carb setup as the 395 Bailey's lists the mufflers for the 4 saws interchanging....they are different. (at least in external bolting and appearance...) Supposedly the pistons will interchange too... I bought a 2095 and the saw originally needed minor work to get running. Was listed as good spark, and good ...

2004年3月23日 · The Jonsered 2095 Turbo model is 93.6cc or 5.7CID and rated at 7.1 HP Tillotson HS 265A carb, gear driven auto oiler, 17.6LBS and has a 30.4 Fl Oz fuel tank. I will give more specific details if you want, just ask me.

2017年2月13日 · I am a firewood cutter / chainsaw enthusiast who just purchased a Jonsered 2095 off of ebay... nice clean looking saw runs good fires right up at idle after second pull, my question is what should the compression be? I thought it would have a bit more bite so i checked it and it has 105psi. I checked my 670 Champ and it has 145.

2018年9月1日 · Jonsered 2095 project. Thread starter cedar rat; Start date Sep 1, 2018; Help Support Arborist Forum:

2014年4月20日 · There are no big bore kits for the 2094/2095 and the Husqvarna 394/395 top ends will not work on the Jonsereds. The case and cylinder heights on the 2094/2095 are different from any other saw. I recently rebuilt a 2094 and I have one left to do. A Meteor 395 piston kit works well in the 2094/2095.

2015年3月7日 · I bought a Anzac 503901401 Ignition Coil Module for Husna 50 51 55 61 254 257 261 262 266 268 272 Chainsaw Jonsered 2054 EPA 2055 2095 at $16 from amazon and carefully pressed it off it's core and carefully installed it onto the 94111 homelite Blue coil of death core and installed the Wico electronic flywheel and spun it with a bat drill and ...