2020年5月28日 · This is a 20mm EDF unit using a 0703 outrunner and clipped 4 blade quad prop. I'll start with a profile jet and get it airborne and go from there. My plan is to have have an indoor jet without too much speed and then go for an outdoor iteration.

2020年12月10日 · The model has an 7.5" span, 28 gram AUW with the 180mah 2S lipo, motor puts out around 26g thrust, two linear servos for the elevons, a Sunrise high frequency switching ESC, and a 6 channel 2.4ghz receiver. All balsa for the construction.

2016年4月13日 · The unknown factor is the efflux. Try mounting the EDF in a simple profile test bird. You may be surprised.

2019年1月30日 · This is a 20mm EDF fan made using a 3D printed housing, 0703 brushless outrunner and a clipped 3 blade propeller. Specs for the Tevo Michelangelo 3D printed ...

Here is my build log for the DH 108 Swallow from Steve Bage's jetex plans that I am modifying into an R/C 20mm EDF fan set up. I did start this a long time...

NitroCharged 20mm EDF: • 20mm EDF Pocket Rocket! DH108 Swallow...

2021年7月30日 · Maiden flight: https://www.youtube.com/watch?v=NYMgAJMpp7oGo check out NitroCharged for other awesome micro EDF projects:https://www.youtube.com/c/NitroChar...

The DH108 Swallow - 15.5" wingspan - allows the fan to just fit into the tail area. This is a design by Steve Page over at jetex.org, intended for a jetex motor. The first half of the fuse showing a half case of the fan unit which I printed up as a guide to make sure it all lines up nicely.

2023年10月24日 · I've seen a few 20mm EDFs in the forum. They're all 3D printed fans, not cut down props. You want thrust but not speed for this kind of model (I'm assuming you're not going for speed, maybe that's wrong).

RC Lander Motor 20mm 8000Kv 3S - Suitable for RC Lander 40mm, for 40mm EDF Unit or any other EDF unit allowing 20mm motor diameter. 3S Lipo. This motor is used with RC Lander RCL-LEDFDPS40-1A80 40mm 8 blades EDF unit for 0.4kg of thrust with 3S. By buying this product you can collect up to 16 points .