2011年1月27日 · There has been a lot of info given on 50cc saws, especially the MS261, 346XP, & 5105. No mention of the 2153!?! Is the 2153 the same saw as the 346XP except for color? Are either or both considered strato saws? Has the 2153 been ignored because of difficulty in finding J'red dealers? Saw Troll...

2012年1月2日 · The real performance differences are quite a bit larger than the specs indicate - the 2153 will cut with saws that are rated at 3.8 hp, just like the NE346xp. The red versions are a tad heavier than the orange ones for obvious reasons, but I doubt you will notise it.

2010年4月7日 · I'm considering purchasing either a Jonsered 2152 for $430, or a Husqvarna 346xp for $500 with an upgraded 18" bar. I know the Jonsered 2153 is the equivalent of the Husqy, but it costs $50 more. My question is, is it worth getting the Husqy, or should I save a little and go with the Jonsered?

2011年12月31日 · I'm actually going to be cutting some wood, seriously. I'm 50 years young now and need a good mid range saw that won't be too bad on my aging back. I looked at the Jonsered 2153 at my dealer the other day, he seemed to have all good things to say about it. I have larger saws if I need to be...

2009年11月28日 · im in the market for another jonsered. i know the questions already been asked & i know most of you guys are gonna say 2153 (346xp). lol. my line of work calls for a small saw every now and then. i owned 2150s in the past and loved them and one 346 oe and didnt like it at all. the 2152 is...

2021年10月19日 · I have a 2153 that has a strange issue. Idles and starts fine, revs fine but cuts out before getting to full rpm. Almost like a rev limiter but much too low. Checked the basics, spark plug, air filter, all that. Any ideas?

2010年5月27日 · A couple years ago a thread existed that matched every Husqvarna model with its Jred twin. I've spent the last hour looking for that thread, but it may have died of old age. Does anyone have that info?

2014年8月17日 · I have a 2153 I'm starting to have trouble starting it especially when hot. this is not normal for my saw. I have never had trouble starting this saw until this year. It also stalls occasionally when hot. I've had it for 7 years and cut about 7 cords per year of wood. just changed the fuel...

2019年5月13日 · A 2153/346XP cylinder is a direct bolt on swap, with a nice pick-up in power, and if yours has the cat muffler, ditch it for the standard muffler. The 2152, 2153, 353, 346xp all share the same crankcase, crank, bearings, etc, so you won't have an inferior saw to the 346xp.

2010年1月3日 · I agree on skipping the 2152, and going for the 2153 (I have the Husky versions of both). The power difference feels larger than the specs tell you. They both have a bracket to keep the muffler safly in place.