After the milling operations are run, measure the lengths of wire you will need for each limit switch. Cut wire to length and solder the female spade connectors and female Dupont connectors to each end of each pair. Make … 展开

The X-axis uses the long reach limit switches and the Y-axis uses the roller style limit switches (as pictured). These switch holders have built in adjustment and tolerances that can adjusted manually until the switches act… 展开

The Z-axis uses the basic snap action limit switches, which are designed to fall flush with each extreme top (+) and bottom (-) of the Z-axis. That is, when the Z-axis trigger block hits the switches, the Z-axis will be at its extreme. To a… 展开

Connect your g-code sender to the router. And send the following commands using the console: $21=1 (enables limit switches) You should now have limit switches enabled and working. If you manually actuate the switc… 展开