In non-US market cars, this revision produced 100 kW (140 hp; 140 PS) at 7200 rpm and torque at 15 kg⋅m (147 N⋅m; 108 lbf⋅ft) at 4800 rpm. The 4A-GE engine was first introduced in the 1983 Sprinter Trueno AE86 and the Corolla Levin AE86 .

2023年2月2日 · Featuring a strong cast iron block and sleek 16 valve aluminum head with two camshafts operated via timing belt, this Injector unit known for its longevity is considered a classic amongst automotive enthusiasts!

The basic 4A was a SOHC inline four (I4) 8-valve carburettor-equipped engine which produces 78-90 hp (58-67 kW) at 4800 rpm, torque: 85 lb·ft (115 N·m) at 2800 rpm. The power and torque output figures vary between different regions of the world.

2009年9月5日 · Everything I've ever seen says the 4AF and 4AG have the same bore and stroke. Bore is 81.0mm, stroke 77.0mm. Wrist pins might be different, especially when dealing with a smallport/20v which have bigger wrist pins than a 16v. 7AF had the same 81.0mm bore but a longer stroke. I don't know about your 4AF intake on a 7AF head.

4AF: This 1.6L SOHC engine was used in the Toyota Corolla from 1983 to 1987. It is a non-interference engine, which means that the valves and pistons will not collide if the timing belt breaks. 2JZ-GE: The 2JZ-GE is a 3.0L DOHC engine that was used in …

2024年11月3日 · Hi ya'll, I am the new owner of a 1989 corolla sr5 coupe, it has a 4AF engine in it. The car was running super rough and did not like being under load. IT was struggling to idle as well. After changing some vacuum lines with silicone, using carb clean, and putting some additives in that tank it runs way better, it is much more driveable.

2023年5月31日 · My 92 Geo Prizm (a Corolla clone) is injected and I have no problems with how it runs. It's also an A131 3 speed Automatic trans model. I've got over 179K miles on it, and it's very reliable. My biggest issue on this car has been body rust. I've replaced a lot of metal on that car just to keep it around, but then I've had it over 12 years now.

This engine appeared in 1987 along with the new generation of the E90 Corolla model and is a classic injection 4-cylinder unit with a cast-iron block and a 16-valve aluminum head with two camshafts, which are driven by a timing belt. Hydraulic compensators are not provided, so the valves need to be adjusted every 100,000 km.

2023年5月17日 · It has step by step instructions on how to do the motor disassembly and reassembly for both the 4A-F and 4A-FE, as well as torque specs, loosening/tightening patterns, pictures, and wiring diagrams. It's seriously the best $40-50 you'll ever spend.

2015年6月3日 · 4A-E (1982 – 1988) is a model with a fuel injection system. Its compression ratio was 9, it had a capacity of 78 HP at 5,600 rpm, with a torque of 117 Nm (86 lb•ft) at 4,000 rpm.5. 4A-ELU (1983 – 1988) resembles the 4A-E engine with an catalytic converter.