40mm Individual Throttle body Assembly. Applications. Kit Includes. Supplied with 240cc injectors, suitable for power outputs in excess of 200bhp!, with optional larger injectors available. Spun Aluminum Velocity stacks with Trumpet ends. Size varies depending upon width of intake manifold spacing pattern and clearances.

2009年4月2日 · Here's a link to his thread http://www.dsmtuners.com/forums/bolt-tech/388075-4g63-itb-turbo.html. If you're going through the trouble of running ITBs I strongly recommend using secondary injection as well.

High-performance individual throttle body inlet system for the Mitsubishi EVO engines. This inlet setup replaces the exiting inlet manifold with our direct to head throttle body setup and turbo plenum. The inlet system fits the engines found in the EVO 4 to EVO 9.

2009年4月19日 · Itb's aren't made for these cars because not many people are building high-rpm race n/a 4g63's. Then you have to make a throttle cable linkage, mount a tps. Alot more work and money compared to the same pwer from a turbo.

-6061 T6 aluminium has high strength, high hardness (up to HB90 degrees), good processing effect, minimum distortion during machining and high pressure tolerance.

A individual throttle body turbo plenum kit for Mitsubishi Evo, offering huge response gains over the standard single throttle body. For engines up to the Evo 10. Jenvey throttle bodies and all Jenvey throttle body accessories are engineered for Motorsport, offering excellent performance, reliability, lightness and value.

MITSUBISHI 4G63 VR4 DSM G1 TO TOYOTA 4AGE 20V ITB ADAPTER SET - fully billet and CNC machined from Aluminum 6061 T6- ⁠rotatable plenum - ⁠rotatable inlet adapter- ⁠customizable size for inlet - ⁠customizable for silver top, Blacktop or Oversized ID50mm- ⁠direct fit on standard 4G63 or DSM engine bay. - ⁠not included the itb

MITSUBISHI 4G63 VR4 DSM G1 TO 4AGE 20V ITB ADAPTER(4 Throttle Adapter) Fully Billet (No Welding)Available for Backtop, Silvertop and ID50mm. A SET IS INCLUDED : BILLET ITB ADAPTER BILLET VACUUM BLOCK TEFLON GASKET 1/8-28 NPT/BSPT OD8.0MM HOSE FITTING 1/8-28 NPT/BSPT OD5.0MM HOSE FITTING 1/4-19 NPT/BSPT OD10.0MM HOSE FITTING MATERIAL:Fully Bil...

Mitsubishi Evo throttle body kit from Jenvey Dynamics includes a 70mm Turbo Plenum, a Jenvey Dynamics EFI inlet manifold, fuel rail, four 19mm long airhorns, a single SFGT70 Throttle body (ITB), Special throttle pot adapter and idle adapter to fit the standard Evo 8 parts.

2004年1月1日 · Thats the prototype system, the production part is cast aluminum with cast plenum parts welded at the 4g63 port centerlines, far superior air flow than the prototype plenum, 1 inch radius on the inlets into each throttle as well as a 3" pad for blowoff valve mounting on closed end of plenum. Email for pictures of system. why?