2024年1月17日 · They offer a direct fit, billet flywheel clutch kit capable of handling 600+ HP and 1300+ NM of torque. They also feel as soft as a factory clutch and are super drive-able. Perfect for those that wheel their cars!

2020年1月1日 · With internally gated turbocharger kit, Haltech ECU package, intercooler, 6boost-pipe manifold as far as I understand it they speak about 200% power increase – means more than 600HP. But where on the rev range – need to see the torque/HP/speed characteristic? The kit including the 6boost and the Haltech ECU it all will approx. end up at EUR ...

The 1FZ-F produced 188 hp (140 kW) at 4400 rpm and 268 lb⋅ft (363 N⋅m) at 2800 rpm; its fuel injected counterpart produced 212 hp (158 kW) at 4600 rpm and 275 lb⋅ft (373 N⋅m) at 3200 rpm. Starting in 1998, the fuel injected version (1FZ-FE) was updated in certain non- US markets .

2012年8月19日 · Again like the Borg Warner the GTX3582R looks really great if you plan on pushing it up to 550-600hp, but is probably just a bit big for the range the stock of the injectors and computer. There are lots of variables this is all at 150ft above sea level, at high altitudes you might opt for the larger turbo.

2007年2月14日 · If someone supplied all of the preformed plumbing and ducting, how much would it need to cost? There must be a couple of stock intercoolers that can be found in junkyards for 75$ that'd work. I'm not looking for an 600hp drag Cruiser, just a smooth 50hp boost that would null out high altitude operation.

2023年9月24日 · The 1FZ-F uses a carburetor, while the 1FZ-FE is electronically fuel injected. In addition, the 1FZ-F has a 8.1:1 compression ratio and makes 188 horsepower and 268 lb-ft of torque. In comparison, the 1FZ-FE makes 212-240 horsepower and 275-300 lb-ft of torque through a 9.0:1 compression ratio.

1fz发动机参数“是1fz-fe机器吧,直列6缸,排量4500,用在lc100系列上的1fz比用在lc80上的要有些改进,主要是优化进气,双缸独立点火,功率有提升,大致在190kw左右.机器很耐用,不挑油,而且低速扭距十分强大,做为一款越野车

2 天之前 · The Toyota 1FZ-FE engine features a cast-iron block and aluminum cylinder head with dual chain-driven overhead camshafts and four valves per cylinder (24 in total). The 1FZ-FE is equipped with an electronic fuel injection system and ignition system with a mechanical distributor.

懂车帝用户蒋力宾发布了一条小视频，视频内容为：六缸丰田lc80采用1FZ-FE汽油发动机，其为4.5升直列6缸24气门的形式，最大功率215马力， 搜索 业务合作 小程序 下载App 发布作品 登录

2018年4月2日 · My friend is thinking to the his gs300 tuned with the AEM V2 to shoot for 600whp mark. He has 1000cc injectors to support the power and is not planning on running e85. I know 2jzgte can hold a lot of power, but would 600whp too much for the stock motor with out putting forge internals? No but 600+ TQ that comes on early will.