2023年2月2日 · there is no such thing as a "7MGTE" standalone. A standalone is exactly that, a standalone. It can be configured to run any engine as long as the standalone has the supporting outputs for the number of cylinders.

2023年10月2日 · So, my solution was to splice wiring from 7mge harness to the "S" connector wires. Note: 1. I was able to run my NA-T using the 7mge's non-heated O2 sensor without any issues (AFR's were good; engine runs smooth without hesitation.). If you choose to stay with the original 7mge O2 sensor, just ignore "HT" pinout on "R" connector. 2.

2016年11月1日 · 7mge has a higher compression ratio than the turbo version, as well as being tapped for two knock sensors, as opposed to one. Turbo also has piston oil squirters, to help keep the pistons cool. There may be a couple of smaller differences I don't recall.

2011年1月30日 · 5. As far as I know there is no aftermarket ECU for the 7mge and the stock one is not able to be tuned. 6. Aftermarket parts are far fewer for the 7mge than they are for the 7mgte. Here is what is available as far modifications and bolt ons that can be done for the 7mge that I know of. If anyone would like to add something please do:

2023年9月17日 · Damn, sounds like you'd be better off just swapping in a different 7mge. At least, one that just has a blown head gasket that is only pressurising the cooling system as was my case. Just needed head restraightened and reconditioned, and it's still holding up 30k miles later.

2008年8月3日 · Hi I would like to start a thread on upgrades to the 7mge engine that are worth doing. I have a an 88 7MGE and I am not looking for turbo upgrade or to race my car. I just want my car to run better as I am sure other do too. Please post your comments what you have done, what were the results...

2011年5月1日 · The Turbo Cars were a very last minute thing so nothing on the engine was changed, the reason why they blow heads like crazy (use metal head gaskets) they just stuck the turbo on programmed the ECU (hopefully) the Turbo ones have a lot of issues just better rebuilding the whole thing with newer parts honestly.

2023年6月27日 · Has anyone used a vibrant resonator on an inline 6 toyota motor or let alone a 7mge? And are there other tried and true weld-in options other than of course buying an hks/revel exhaust. The resonator with the dm muffler might already be overkill since the muffler doesn't drone as much (atleast watching videos about Brian Pontifes 2jz xjs, as it ...

2024年10月31日 · I currently have a 7MGE that I'm swapping out for a 7MGTE from an '88 Supra. I have all the parts for the 7MGTE except for the exhaust manifold, intercooler, some ignition parts, and CAT (I think its the CAT, I'm not really sure what pipe goes after the turbo exhaust port before it gets to the exhaust pipe that leads to the mufflers.

2023年12月30日 · Still working on a 90 MK3 7MGE and never saw a mounted fuel pressure drop VSV and found no evidence of the connector in the harness. According to the Cygnus vacuum diagram, it's there, but not in the FSM wiring diagram, and not in the car. There is a nipple on the fuel pressure regulator, and ports for it on the steel piping.