RMP3 (if installed) is able to control VHF and HF transceivers through RMP1 and RMP2 even when either of the latter is OFF. When the pilot presses one of these keys: The ACTIVE window displays the frequency set on that radio. The STBY/CRS window displays the selected standby frequency or course. The selected key displays a green monitor light.

2024年3月11日 · VHF is used for all short-range voice communications between different aircraft in flight or between the aircraft and ground stations. Optionally, aircraft can have the VHF Data Link (VDL) system, to communicate via the data mode (data communication), in addition to the voice mode (voice communication).

Realistic datalink communication simulation (VHF+VDL3) Simulation of FANS-A+ and FANS-B+ with automatic mode selection based on logon-code of ATC Station identifier

vhf是近距离通信，hf是远距离通信。vhf1天线和vhf2天线用于飞机与地面电台或者飞机与飞机之间的通讯信息的发射与接收，vhf3天线是用于和acars系统进行数据通信的

During yesterdays flight on MSFS (FlyByWire A320N) I’ve realized „VHF3 voice” message on upper ECAM display. Could someone please provide assistance in order to make this message go away? Thanks in advance, Press the VHF3 button on the radio panel. Then press the frequency swap button.

A319 QUICK REFERENCE CHECK LIST REV. 06 ENGINE TAILPIPE FIRE Internal engine fire may be encountered during engine start or engine shutdown. It may be seen by the ground crew, or the EGT may fail to decrease after the

2024年3月26日 · For reference this is flying the FBW A320N, which according to their documentation page supports transmit on VHF 1-3 in MSFS2020. I have a throttle button bound to PTT in vpilot. There isn't really a practical reason for this but it should work and so it would be nice to establish how it works.

Flight plan equipment list is letter F (ADF), G (GNSS), L (ILS), O (VOR), R (PBN), V (VHF), /C (Mode C transponder). The equipment to be inserted into flight plan item 10 is SFGR/C. Remember not to insert O, L & V with the use of letter S. …

2024年5月27日 · The black rotating knob below VHF button in used for receiving but not transmitting and if you want to transmit you activate the VHF1 button. So in order to use the ATC you need to activate VHF1 (left click) button and the receiver knob (right click)

The VHF 3 standby frequency for the left RMP. A32NX_RMP_R_VHF1_STANDBY. Hz; The VHF 1 standby frequency for the right RMP. A32NX_RMP_R_VHF3_STANDBY. Hz; The VHF 3 standby frequency for the right RMP. A32NX_RMP_{L,R}_SAVED_ACTIVE_FREQUENCY_VOR. Hz; The VOR active frequency that is saved for display for the left/right RMP.