Individual device Modbus® addresses can easily be configured using the optional keypad/display or using the XMV Interface application in ABB’s Totalflow flow computers or RTUs.

The ABB XMV (267CS/269CS) measures Static Pressure, Differential Pressure, and Process Temperature in a vapor or liquid media. The XMV (multi-variable transmitter) is a two - wire RS 485 Modbus device with two additional

ABB’s freedom of choice offers the right driver for the major fieldbus protocols suitable for ABB devices. The version matrix document shows for each protocol the software revision that’s …

This document describes the setup of an ABB Multivariable Transmitter (XMV) in Section I, the setup of the XSeries XFC or XRC flow computer in Section II, and the interconnection wiring in Section III. The ABB XMV measures Static Pressure, Differential Pressure and Process Temperature in a gas, vapor or liquid media.

ABB has ever produced. This is a startup guide designed for typical installations only. Installations must be performed by personnel knowledgeable of the theory of gas measurement and the Totalflow® 266 MODBUS® Multivariable Transmitter.

ABB is a supplier and manufacturer of multivariable transmitters that calculate the mass flow as a function of differential pressure.

The XMV (267CS/269CS) measures static pressure, differential pressure, and process temperature in a vapor or liquid media.

/2101155-EN Rev. AN XMV Multi-variable transmitter Introduction The ABB XMV (267CS/269CS) measures Static Pressure, Differentia. Pressure, and Process Temperature in a vapor or liquid media. The XMV (multi-variable transmitter) is a two-wire RS. 485 Modbus device with two additional wires required for power.

Individual device Modbus® addresses can easily be configured using the optional keypad / display or using the XMV interface application in the ABB Totalflow flow computers or Remote Terminal Unit (RTU) devices.

All standard XMV configuration files are built to support the XMV with display. If the display is not used, the user should delete the MVxxTXT.mrb files in the Modbus folder under the XMV communications port.