2024年4月8日 · The Airspy receivers are heavy users of the USB interfaces. Are there any tests or evaluations on using Pi4’s USB2 or USB3 connections for the best performance with the Airspy receivers? I suspect we would have to assume the Airspy’s were the only devices connected via USB. Looking at the spec’s on the receivers, no mention if they are set up for USB2, 3.0 or 3.1 …

2024年8月17日 · Due to a hardware failure I need to buy another receiver. I’ve decided on an Airspy product to use with either a Pi 4 or 5. Is the R2 performance that much different than the Mini considering the $70 price difference?

2019年1月5日 · Automatic installation scripts: GitHub - wiedehopf/airspy-conf: Configure airspy_adsb for use with readsb or piaware. Manual installation / configuration: Manual airspy configuration to work with dump1090 fa and piaware · wiedehopf/airspy-conf Wiki · GitHub

2024年12月7日 · I’m considering a new project for the winter, building a new receiver in a new box. At the moment, I’m running a Pi4 with an AirSpy mini. My CPU utilisation is always high. (this has been a bit odd since Tuesday, I wonder why) My current build is a bodge, it’s really untidy in the box so it would give me a good opportunity to tidy things up. I know I asked about …

2024年10月5日 · Swap out FA prostick + stick for the Airspy and test it all works. or just go straight for it with pi5 and airspy mini. Maybe part of me wanted to know if the pi5 made any difference with the old setup. Looking to improve the 150 aircraft/1500 messages per sec - although now that the leaves are dropping from trees, it may improve slightly anyway.

2020年5月8日 · The Airspy R2 series were already privileged for their high dynamic range and low phase noise. Now these parameters just got better with a simple firmware update. Check the firmware download in the product page: Airspy R2 - airspy.com. Enjoy! The Airspy Team. I ran the update on my R2, and working on a remote mini install via command line.

2024年2月23日 · Install readsb or dump1090-fa, then rerun the airspy install script. If you used dump1090-fa, reinstall tar1090. SoNic67 February 25, 2024, 12:58pm

2021年7月5日 · dump1090-fa-v5.0.5-airspy dump1090-fa-v5.0.4-airspy dump1090-fa-v5.0.3-airspy dump1090-fa-v5.0-airspy Way back in October of last year, I started working in integrating native AirSpy support into dump1090-fa. I actually finished it back in January/February but @obj has been swamped and just hasn’t had the time to create an official dump1090-fa release with …

2024年12月11日 · A new receiver will be more expensive without necessarily improving the reception by much as it is implementd in airspy_adsb utility. On the other hand, the Ranger is a high-end SIGINT receiver with loads of dynamic range (20-bit) and sensitivity (-143 dBm MDS) from DC to UHF and an aggressively filtered narrow-band IF.

2024年9月6日 · That’s 150 mA vs the airspy advertised 50 mA of biastee power available. Would recommend getting an external biastee anyhow to supply the rtl-sdr LNA. (not that you have a choice probably)