You cannot communicate between the MIPS SoC and the Uno whilst at the same time using the USB connection, like you can with the full blown Yun. Uploading sketches can be an issue - you may want to remove the Yun shield while uploading. The Yun is closer in operation to an Yun Shield + Arduino Leonardo than an Uno.

2015年2月8日 · Note this is the FileIO library from the Yun Bridge package to read from the SD card built into the Atheron side of the Yun. The "normal" Arduino SD card library isn't relevant here. arduino-yun

2014年8月19日 · I need the arduino yun to act as an ssh client to start an ssh session with another box and then execute some basic commands. – Joem Commented Aug 20, 2014 at 5:04

2014年3月1日 · the Arduino YUN wifi antenna onboard is an "SWF£ female connector type; not an IPX ;-) – user4096.

2019年5月30日 · From this post to the thread on the Arduino forums, Yun Serial connection between Arduino and Linux. Accepting HTTP connections, as shown in the Bridge tutorial, is but one facet of the Bridge library. (And probably the least useful and least efficient facet.)

After installing the bonjour browser I should be seeing a connection called .arduino._tcp but I don't see that. In fact I often can't see any connection what so ever. and sometimes I can see a few connections but none of those are the arduino. I have tried to ping with the arduino on the adress 192.168.240.1 but all I got was a time out.

2014年8月2日 · As the title, I'd like to reset the Arduino sketch from the linux machine. Is it possible? how? One solution could be to save the hex file inside the sd card and then upload it via the lua sketch ...

2017年10月26日 · Stack Exchange Network. Stack Exchange network consists of 183 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

(Arduino Blog) Therefore, the Yun does not have a onboard RTC. If there there is no RTC, can I connect a DS1307 to the Atheros AR9331? Probably not. It comes in a LPCC package, which has the solder joints on the bottom. This needs to be soldered by reflow. The Yun does not have any pins connected directly to that chip.

2014年2月18日 · I am involved in a project that is going to measure PH and chlorine in a swimming pool. The plan is to use a Arduino Yun. The sensors we are going to use are connected using serial. Since we may be using multiple sensors, is there any difference in reliability, latency, known issues (bugs) of using software serial versus pin0 and pin1?