
HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D.C., 7 FEB 1995 OPERATOR'S UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
This introduction (section I) provides a general explanation of all maintenance and repair functions authorized at various maintenance levels under the standard Army Maintenance System concept.
Figure 1-7. D-1 Nozzle Assembly - fuelpumps.tpub.com
The D-1 nozzle assembly (1), figure 1-7, is a four part assembly: D-1 nozzle (2) with a ground cable assembly (3), 45 psi regulator (4), 45 degree inlet (5), and a two-inch, non-valved unisex coupling (6). All the component parts rotate around the inlet/outlet for easier connection to the aircraft receiver and fuel hose.
Model 64201H, is a 2-1/2 inch pressure fueling nozzle that has been qualified to MIL-N-5877, Rev E and listed on that QPL as the D-1 nozzle. Model 64201J is qualified to MIL-N-5877, Rev E and listed on that QPL as the D-2 nozzle. The mil-spec does not allow for all of the options shown in this manual but they can be procured as noted herein. The unit is designed to mate with adapters ...
MIL-N-5877 E NOZZLE PRESSURE FUEL SERVICING LOCKING TYPE …
MIL-N-5877E, MILITARY SPECIFICATION: NOZZLE, PRESSURE FUEL SERVICING, LOCKING, TYPE D-1, D-1R, D-2 AND D-2R, NOMINAL 2 1/2 INCH DIAMETER (16-OCT-1986) [S/S BY SAE-AS5877]., This document specifies the requirements for four types of locking pressure fuel servicing nozzles, designated Types D-1, D-1R, D-2 and D-2R, which have a nominal inlet diameter of 2 1/2 inches
Figure 2-1. Single Point Refueling Nozzle (D1) Controls. - TM-10 …
SINGLE POINT REFUELING NOZZLE (D1). Refer to figure 2-1. Locking Handles (1). Two locking handles on the nozzle body aid positioning and connection of the nozzle to the aircraft refueling adapter. The handles are turned to the right to connect the nozzle; left to disconnect. Control Lever (2). The control lever has two positions, OPEN and CLOSE.
NPFC - MIL-N-5877 - NOZZLE, PRESSURE FUEL SERVICING
1992年7月1日 · This document specifies the, requirements for four types of locking pressure fuel servicing nozzles, designated Types D-1, D-1R, D-2 and D-2R, which have a nominal inlet …
Figure 6. D-1 Nozzle Assembly
The D-1 nozzle assembly (1), figure 6, is a four part assembly: D-1 nozzle (2) with a ground cable assembly (3), 45 psi
Figure 23. D-1R Nozzle Assembly
TM-10-4930-351-24P Advanced Aviation Forward Area Refueling System (AAFARS) Model M1001A1 Manual Page Navigation 66 67 68 69 70 71 72 73 74 75 76
United States Transportation Command
Use the following Uniform Resource Locator (URL) to access tables in the USTRANSCOM Reference Data Management (TRDM): https://trdmws.maf.ustranscom.mil, then select the DTR tab on the left.
- 某些结果已被删除