2007年12月9日 · This is a removed ICV Tools required: T30 Torxs Driver and bit, Flat Blade Screwdriver, Carb Cleaner and a 10mm Spanner (Wrench for the US wrench!). If possible the torx bit should be a couple of inches long, it will just make it …

2012年2月15日 · The icv isn't supposed to be spring loaded, it is supposed to have free movement when you shake it. Most times it gets gummed up and stuck or hard to move. That's why you clean it.

2011年12月20日 · If I read the realoem diagrams correctly, the 528i manufactured up to 9/98 had the ICV toward the front of the manifold attached to a hose from the intake boot just ahead of the secondary throttle body. After 9/98, the ICV is toward the back of the intake manifold.

2005年12月15日 · 1) Disconnect the "elbow" leading into your throttle body (or ASC throttle if you have it) and put aside. Remember that there's a hose attached to the bottom of the elbow, that connects the ICV to this elbow. This hose is important - …

2014年3月18日 · Thy ICV is within easy access, can be removed AND replaced within 3 minutes (with a little practise), and without damaging anything in the process, and on a hot engine without any risk of burns, to boot.

2005年2月28日 · Accessing the ICV: 1-Remove intake or (air box), AFM (aka MAF, HFM), the intake elbow boot and the alternator duct. 2-Remove the 4 bolts that hold the throttle body to the manifold and set the TB aside.

2006年9月16日 · Before you start trying to take the ICV out, you should understand what it looks like. The hose on the right is the one you just unplugged from the rubber intake boot. The one on the left runs verticl and into the underside of the intake manifold: Here is …

2022年2月2日 · This is an excerpt from the factory E30 repair manual instructing how to mechanically and electrically test the ICV (idle control valve) for an M20 engine....

2009年1月27日 · This is a journal of the work I did on my car-a 2001 BMW 325i E46 sedan, auto transmission. To the best of my recollection, the following tools, parts, and procedures are what I used in working on my car.

Idle Control Valve (ICV) - This is essentially a low-flow, high precision throttle body that provides fine grained control of the engine below approximately 20% throttle.