
BTR-70 - Wikipedia
The BTR-70 is an eight-wheeled armored personnel carrier (Russian: бронетранспортёр, БТР, romanized: bronetransportyor, lit. 'armored carrier') originally developed by the Soviet Union during the late 1960s under the manufacturing code GAZ-4905. On August 21, 1972, it was accepted into Soviet service and would later be widely exported.
【坦克型号盘点系列】T-72/90底盘的其他衍生车辆(重置版)
BMPT-72“终结者2”坦克火力支援车 BMPT的升级型,主打外贸市场,其将两侧的“攻击”反坦克导弹整合到了特制的发射箱中,使得四根发射管变为了两组双联装发射箱。
[全球装备鉴赏]BTR-80装甲运兵车家族概览 - 哔哩哔哩
BTR-80吸取了BTR-70在实战中的经验教训,并结合了BTR-70的几个关键优势,根据现代战场环境的变化引入了各种新设备。 以 BTR-70 为设计出发点,苏联工程师取消了之前 BTR-60 和 BTR-70 搭载的双汽油发动机设置,而是安装了V8发动机,代号“KamAZ-7403”的柴油发动机,在 ...
俄罗斯装备志——BTR60到BTR80轮式步战车 - 知乎
BTR60轮式步战车为苏联设计生产的主要用来在战场运输步兵的装甲车辆,最先设计出来的并未安装装甲顶棚,为半开放式,类似于二战时期的苏联研制的K-75履带式装甲运兵车布局,能够依靠东欧平原快速机动。 最大公路时…
БТР-70轮式装甲人员输送车 - 百度百科
它在1970年投入生产前经过两年的测试,1972年8月21日投入使用,因此十年前的BTR(代表“Bronetransportyor”)为“70”。 实际上,大多数是在20世纪80年代交付的 [3]。 该车车体由钢板焊接,同БТР-60系列车相比,车头较宽,改善了车前装甲以及车体前部和前轮之间的附加装甲。 车长和驾驶员并排坐在车前部,驾驶员在左,车长居右,车前有两个观察窗,战斗时窗口都由顶部铰接的装甲盖板防护。 每个窗口有3个前视和1个侧视潜望镜,在侧视潜望镜下面还有1个射孔。 …
BTR-70 APC (1972) - tank-afv.com
The BTR-60/70/ 80 /90 family is now an unmistakable landmark in the history of APCs, being one of the first height-wheeled amphibious vehicle developed in the east, and which proven rugged and adaptable to countless uses.
如何造出披着装输外衣的轮式步战车?【Top说81】苏/俄BTR-70——BTR …
本期视频,咱们简单聊一聊世界两极其中一家在轮式装甲车发展历史上,占据重要地位的苏/俄BTR系列轮式装甲车族,从BTR-70到BTR-82的发展故事。 对俄式大八轮感兴趣的同学们,还请不要忘记多多点赞转发一键三连支持一波哦,这块内容我起码还能水(划掉)和大家好好唠上个两三 …
ACE 72164 BTR-70 (early production series) - Super-Hobby
The wheeled armored personnel carrier BTR-70 was developed in the late 1960s and entered service with the Soviet Army in 1973. Serial production of the vehicle took place in the years 1973-1984. The vehicle was powered by two carburetor engines with a total power of 240 HP and took 7 landing soldiers.
俄罗斯BTR-70 装甲输送车 (早期型) 07137-1/72 系列-小号手 …
BTR-70是一种八轮装甲人员输送车,上世纪60年代后期,作为GAZ-4905项目计划开始研制。 1972年8月21日开始进入部队服役,而且后来被输出到华约组织成员国和其他友好国家。
T-72 turret = BTR-72 tank destroyer - ARC Discussion Forums
2008年12月10日 · A BTR-80 hull with the turret of a T-80 MBT. Here's what will be involved in building this beast. As can be seen I use the relatively recent 1/72 Trumpeter BTR-80 and the turret of the also relatively recent Revell T-72M1. The BTR-80 uses a grand total of 67 parts (all parts are shown above), but looks rather nice. The T-72 also looks very nice.
- 某些结果已被删除